Sun Hydraulics 2-Way, Pilot-to-Shift Directional Valve with Drain to Port 4, Normally Closed — DRAX

Sun Hydraulics 2-Way, Pilot-to-Shift Directional Valve with Drain to Port 4, Normally Closed: DRAX, series 1, .5 gpm (2 L/min), T-21A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.
Key features
- Valve function: Pilot-to-Shift Directional Spool Valve
- Capacity: .5 gpm (2 L/min)
- Max operating pressure: 5000 psi (350 bar)
- Cavity: T-21A
- Valve function
- Pilot-to-Shift Directional Spool Valve
- Series (frame sizes)
- 1
- Cavity
- T-21A
Product description
A spool directional cartridge moved by hydraulic pilot pressure instead of a solenoid. The 4-way versions are 6-port valves with supply at port 3 and pilot ports X and Y (ports 5 and 6); all ports, pilot ports included, take 5,000 psi (350 bar). A choice of spools sets the flow paths.
This version
- Normally closed.
- The spring chamber drains to a separate port 4, so pressure at port 3 does not shift the setting and port 3 can work as a load port.
Sizes and cavities
Sun Hydraulics builds this valve in one version:
- DRAX — series 1, T-21A cavity, .5 gpm (2 L/min)
Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.
Ratings
- Maximum operating pressure: 5000 psi (350 bar)
- Maximum leakage: 20 drops/min. (20 drops/min)
Configuration options
The letters after the base model code choose these options (shown for DRAX; a size may add or drop a choice):
- Control: C — Tamper Resistant - Factory Set, L — Standard Screw Adjustment
- Setting range: A — 1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting, C — 2000 - 6000 psi (140 - 420 bar), 2000 psi (140 bar) Standard Setting
- Seal material: L — Extended Temp. Buna, N — Buna-N, V — Viton
- Material / coating: /AP — Stainless Steel, Passivated
Option rules: EPDM seals are not allowed on modifier /AP; If the modifier is /AP, the control must be L.
Selection notes
- Capacity depends on the spool: flow forces can stop a spool reaching full stroke at high flow and pressure, so higher flows are possible at lower pressures.
- Check the minimum pilot pressure in the ratings against your pilot supply.
Where it is used
Main-stage directional control piloted from a joystick, a remote pilot valve or a small solenoid pilot.
Installation and seal kits
Hex 7/8 in. (22,2 mm); installation torque 30 - 35 lbf ft (41 - 47 Nm). Replacement seal kits — series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006.
Ordering
Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DRAXLAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve function | Pilot-to-Shift Directional Spool Valve |
| Series (frame sizes) | 1 |
| Cavity | T-21A |
Performance
| Parameter | Value |
|---|---|
| Capacity | .5 gpm (2 L/min) |
| Max operating pressure | 5000 psi (350 bar) |
| Setting range | A — 1000 - 3000 psi (70 - 210 bar), 1000 psi (70 bar) Standard Setting, C — 2000 - 6000 psi (140 - 420 bar), 2000 psi (140 bar) Standard Setting |
| Max leakage | 20 drops/min. (20 drops/min) |
Configuration
| Parameter | Value |
|---|---|
| Control / adjustment | C — Tamper Resistant - Factory Set, L — Standard Screw Adjustment |
| Seal material | L — Extended Temp. Buna, N — Buna-N, V — Viton |
| Material / coating | /AP — Stainless Steel, Passivated |
Installation
| Parameter | Value |
|---|---|
| Valve hex size | 7/8 in. (22,2 mm) |
| Installation torque | 30 - 35 lbf ft (41 - 47 Nm) |
| Seal kits | series 1: Buna: 990021007, Polyurethane: 990021002, Viton: 990021006 |
| Weight | .30 lb (0,15 kg) |
Shipping & lead time
Sizes & part numbers
1 size- Sun Hydraulics part no.DRAX
- Series
- 1
- Cavity
- T-21A
- Capacity
- .5 gpm / 2 L/min
- Max pressure
- 5000 psi / 350 bar
Series — Frame size the cartridge is built in, as the maker numbers it; one series shares one cavity size. Cavity — Cavity the cartridge screws into, as the maker designates it. Capacity — Rated flow capacity as published, in US and metric units. Max pressure — Maximum pressure as the maker publishes it, in psi and bar.
Part numbers are the maker’s base model codes. The full ordering code adds letters for the control, setting range, seal and material options, and we confirm it with the quotation. Capacity and pressure are the maker’s published ratings for the cartridge; check them against the cavity body and the rest of the circuit.
What is the Sun Hydraulics DRAX pilot-to-shift directional spool valve used for?▾
Which sizes and versions does the Sun Hydraulics DRAX pilot-to-shift directional spool valve come in?▾
How do I read the Sun Hydraulics model code DRAXLAN for the DRAX pilot-to-shift directional spool valve?▾
What is the maximum operating pressure of the Sun Hydraulics DRAX pilot-to-shift directional spool valve?▾
What flow capacity does the DRAX pilot-to-shift directional spool valve have?▾
Which seal materials and body finishes does the Sun Hydraulics DRAX pilot-to-shift directional spool valve come with?▾
Which cavity does the Sun Hydraulics DRAX pilot-to-shift directional spool valve fit?▾
Which seal kit fits the Sun Hydraulics DRAX pilot-to-shift directional spool valve?▾
How is the Sun Hydraulics DRAX pilot-to-shift directional spool valve installed?▾
Where is the Sun Hydraulics DRAX pilot-to-shift directional spool valve used?▾
Sun Hydraulics DRAX or DRAY: what is the difference?▾
Do you stock the Sun Hydraulics DRAX in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations








