Skip to content
SUN HYDRAULICSIH-SUN-DMBF

Sun Hydraulics FLeX Series 3-Way, Solenoid-Operated Directional Spool Valve — DMBF

Solenoid Cartridge ValvesEx-stock · delivery in 3 days
Sun Hydraulics DMBF 3-way solenoid-operated directional spool valve, series 0, T-150A cavity — dimension drawing
VIEW 01·Sun Hydraulics DMBF 3-way solenoid-operated directional spool valve, series 0, T-150A cavity — dimension drawing
1 / 3

Sun Hydraulics FLeX Series 3-Way, Solenoid-Operated Directional Spool Valve: DMBF, series 0, 4 gpm (15 L/min), T-150A cavity. Authorised Sun Hydraulics distributor, UAE — supplied direct from Sun.

Key features

  • Valve function: 3-Way Solenoid-Operated Directional Spool Valve
  • Capacity: 4 gpm (15 L/min)
  • Max operating pressure: 5000 psi (350 bar)
  • Cavity: T-150A
Valve function
3-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)
0
Cavity
T-150A
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

A direct-acting, balanced-spool 3-way, 2-position valve. It switches a common port between two others with no minimum pressure, and its flow paths work in both directions.

This version

  • FLeX Series: tested to 10 million cycles at full rated pressure and zinc-nickel plated as standard for 1,000 hours of salt-fog protection.

Sizes and cavities

Sun Hydraulics builds this valve in one version:

  • DMBF — series 0, T-150A cavity, 4 gpm (15 L/min)

Sun builds its cartridges in frame sizes called series. The series fixes the cavity the valve screws into, so every function in one series shares that cavity, and a larger series carries more flow. Choose the smallest series that passes your flow at an acceptable pressure drop, using the performance curves, then the configuration options. If you are replacing a valve, the model code stamped on it gives the series and function directly, and the seal kits listed further down fit that series.

Ratings

  • Maximum operating pressure: 5000 psi (350 bar)
  • Typical response time: 50 ms
  • Switching frequency: 15,000 max. cycles/hr

Configuration options

The letters after the base model code choose these options (shown for DMBF; a size may add or drop a choice):

  • Control: P — Manual Pull Override, X — No Manual Override
  • Spool / poppet configuration: A — Normally Open 1 to 2, Closed 1 to 3, N — Normally Open 2 to 3, Closed 1 to 2
  • Seal material: N — Buna-N, V — Viton, E — EPDM
  • Coil: 46 coil choices, or no coil — 12 VDC, 14 VDC, 24 VDC, 28 VDC, 115 VAC, 230 VAC; connections include DIN 43650-Form A, AMP Junior Timer, Twin Lead, Metri-Pack, Deutsch DT04-2P, Explosion Proof

Option rules: If the coil is in this group (211, 212, 212D, 214, 214D, 223, 224, 224D, 228, 228D, 912, 912D, 914, 914D, 924, 924D, 928, 928D, JM24BD, JM24CD, JN24BD, JN24CD), the range must be A or N; If the coil is in this group (612, 612D, 614, 614D, 624, 624D, 628, 628D, 712, 712D, 714, 714D, 724, 724D, 728, 728D, 812, 812D, 814, 814D, 824, 824D, 828, 828D), the range must be N or A; If the seal is E, the control must be X.

Selection notes

  • The pilot-capacity versions are sized to pilot other valves and leak under 10 drops a minute at 5,000 psi.
  • The solenoid tube is fatigue-rated for 5,000 psi (350 bar) unless the title gives a lower rating.

Where it is used

Single-acting cylinders, pilot signals to logic elements and main stages, selecting between two pressures.

Installation and seal kits

Hex 3/4 in. (19,1 mm); installation torque 25 - 30 lbf ft (35 - 40 Nm). Replacement seal kits — series 0: Buna: 990150007, Viton: 990150006. Coil seal and nut kit: Viton: 990740006.

Ordering

Indus Hydraulics is an authorised Sun Hydraulics distributor in the UAE and supplies the range direct from Sun Hydraulics. Quote the base model and its configuration letters — for example DMBFXAN — or describe the duty and we select the part. We confirm the full ordering code with the quotation.

Identification

ParameterValue
Valve function3-Way Solenoid-Operated Directional Spool Valve
Series (frame sizes)0
CavityT-150A

Performance

ParameterValue
Capacity4 gpm (15 L/min)
Max operating pressure5000 psi (350 bar)

Configuration

ParameterValue
Control / adjustmentP — Manual Pull Override, X — No Manual Override; A — Normally Open 1 to 2, Closed 1 to 3, N — Normally Open 2 to 3, Closed 1 to 2
Seal materialN — Buna-N, V — Viton, E — EPDM

Installation

ParameterValue
Valve hex size3/4 in. (19,1 mm)
Installation torque25 - 30 lbf ft (35 - 40 Nm)
Seal kitsseries 0: Buna: 990150007, Viton: 990150006
Weight.65 lb (0,30 kg)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at