Studless Chain Tail — 78 mm Grade 3

Studless Chain Tail. Indus part number.
Key features
- Product type: Studless Chain Tail
- Size range: 78 mm, Grade 3
Product description
Chain tail of studless and stud link links, 78 mm Grade 3, used at the anchor or fairlead end of a mooring line.
Configuration
Supplied as one configuration: 78 mm, Grade 3. Its Indus part number is in the table below.
Specifying
State the diameter, grade (ORQ, R3, R3S, R4, R4S or R5), stud link or studless, the length and the class or API certificate you need.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Studless Chain Tail |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 78 mm, Grade 3 |
Compliance
| Parameter | Value |
|---|---|
| Certification | Classification-society certificate (ABS, BV, DNV, LR and others) on request |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-MR-MC-TAIL-0780
- Size
- 78 mm, Grade 3
- Grade
- Grade 3
- Chain size
- 78 mm
Size — Nominal size as the manufacturer states it. Grade — Material grade of this row — carbon and alloy versions share a frame but not a rating. Chain size — Chain the fitting is made for. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Studless Chain Tail — 78 mm Grade 3 and what is it used for?▾
What sizes does the Studless Chain Tail — 78 mm Grade 3 come in?▾
How do I specify the Studless Chain Tail — 78 mm Grade 3?▾
What is the load rating of the Studless Chain Tail — 78 mm Grade 3?▾
How do I order the Studless Chain Tail — 78 mm Grade 3?▾
How does the Studless Chain Tail differ from the Studless Five-Link Adaptor?▾
What grade and material is the Studless Chain Tail — 78 mm Grade 3 made in?▾
What certificate comes with the Studless Chain Tail — 78 mm Grade 3?▾
What does the Studless Chain Tail — 78 mm Grade 3 connect to?▾
How should the Studless Chain Tail — 78 mm Grade 3 be inspected?▾
Where is the Studless Chain Tail — 78 mm Grade 3 used?▾
Does Indus stock the Studless Chain Tail — 78 mm Grade 3 in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Stud link vs studless chain: strength, weight, and why ships and offshore moorings choose differently
A stud link chain has a bar across every link; a studless chain does not. The stud keeps the link from closing up and the chain from kinking in the locker, at the cost of weight and a joint that can work loose. How the two compare on proof load, breaking load and weight, and where each one belongs.
5 min read
Anchor chain & mooring
Offshore mooring chain grades ORQ, R3, R3S, R4, R4S and R5: strength, toughness and loads
The six offshore mooring chain grades compared: tensile and yield strength, elongation, reduction of area and Charpy impact energy for each, the IACS test-load constants, what 76 mm chain carries in every grade, and how the R grades differ from ship anchor chain grade U3.
4 min read
Anchor chain & mooring
How anchor chain is made: cutting, bending, flash-butt welding, stud setting and heat treatment
Almost all anchor and mooring chain is made the same way: steel bar is cut, heated, bent into a link through the one before it, flash-butt welded shut, studded, heat treated, and then every length is proof loaded. The steps in order, what each one decides about the finished chain, and what changes for offshore mooring chain.
4 min read






