Steel Spring Hose Guard for Jack Hose
Steel Spring Hose Guard for Jack Hose: 2 part numbers, 1/4" to 3/8".
Key features
- Application Family: hose guard
- Inner Diameter Range: 1/4" to 3/8"
- Application Family
- hose guard
Product description
Round-wire steel spring that slides over 1/4" or 3/8" hydraulic jack hose to protect it from abrasion and kinking at the fittings.
Construction
- Material: steel spring wire
- Sized for 1/4" and 3/8" jack hose (the size column is the hose bore)
- Length is not published; it is confirmed with the quotation
Sizes and supply
2 part numbers, 1/4" to 3/8". Each part number is one size in one supply form; the Sizes & Part Numbers tab lists them.
How to order
Quote the Indus part number, or send the hose O.D. and the length you need. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Application Family | hose guard |
Dimensions
| Parameter | Value |
|---|---|
| Inner Diameter Range | 1/4" to 3/8" |
Construction
| Parameter | Value |
|---|---|
| Construction | Material: steel spring wire; Sized for 1/4" and 3/8" jack hose (the size column is the hose bore); Length is not published; it is confirmed with the quotation |
Shipping & lead time
Sizes & part numbers
2 sizes| Indus part no. | Hose bore |
|---|---|
| IH-HP-HJKHG04-95 | -04 · 1/4" |
| IH-HP-HJKHG06-95 | -06 · 3/8" |
How do I pick the size?▾
Do you sell cut lengths?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Failure analysis
Cracked cover: heat ageing against ozone attack
A cover covered in fine cracks has been cooked, or has been sitting in sunlight and still air. The crack pattern separates them, and only one of the two is fixed by moving the hose.
4 min read
Gulf operating conditions
Sand: the abrasive that gets between the hose and everything else
On a desert site the hose is not rubbing against a bracket. It is rubbing against a bracket through a layer of sand — and that changes both how fast the cover goes and what actually stops it.
3 min read
Failure analysis
Abrasion failure: finding the rub point before it finds you
The most preventable hose failure there is. A hose worn flat on one side has been telling you where it touches something for months — and the wear pattern points straight at the cause.
4 min read
Engineers viewing this also looked at
Nylon Sleeve Hose Guard
Plastic Spiral Hose Wrap
Buyers Products T-Bolt Hose Clamps
Double Bolt Clamp
Double Bolt Super Clamp
Drag Hose Clamp
Drag Hose Coupling Ring Clamp
