Stainless Steel Pulley Block with Removable Pin — 4.762–25 mm

Stainless Steel Pulley Block with Removable Pin, in 3 sizes, 4.762 mm to 25 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Pulley Block with Removable Pin
- Size range: 4.762 mm to 25 mm
- Size range
- 4.762 mm to 25 mm
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. Type 304 or type 316 stainless steel, polished.
Sizes
3 sizes, 4.762 mm to 25 mm. Available as: plain, with bracket, with toggle. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Pulley Block with Removable Pin |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 4.762 mm to 25 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-BP-SSPBRP-25MM-P
- Size
- 25 mm
- Type
- Plain
- A (mm)
- 45
- B (mm)
- 26
- C (mm)
- 5
- D (mm)
- 11
- E (mm)
- 1
- F (mm)
- —
- G (mm)
- —
- Weight (kg)
- 0.023
- Weight (lbs)
- —
- Indus part no.IH-LR-BP-SSPBRP-4P762MM-B
- Size
- 4.762 mm
- Type
- With bracket
- A (mm)
- 6.35
- B (mm)
- 25.4
- C (mm)
- 63.5
- D (mm)
- 4.762
- E (mm)
- 9.525
- F (mm)
- —
- G (mm)
- —
- Weight (kg)
- —
- Weight (lbs)
- 0.08
- Indus part no.IH-LR-BP-SSPBRP-25MM-T
- Size
- 25 mm
- Type
- With toggle
- A (mm)
- 45
- B (mm)
- 26
- C (mm)
- 5
- D (mm)
- 11
- E (mm)
- 1
- F (mm)
- 59
- G (mm)
- 10
- Weight (kg)
- 0.026
- Weight (lbs)
- —
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. G — Dimension G on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Stainless Steel Pulley Block with Removable Pin and what is it used for?▾
Which sizes of Stainless Steel Pulley Block with Removable Pin are available?▾
How do I size the Stainless Steel Pulley Block with Removable Pin for a job?▾
What load rating does the Stainless Steel Pulley Block with Removable Pin have?▾
How do I order a specific size of the Stainless Steel Pulley Block with Removable Pin?▾
When should I choose the Stainless Steel Pulley Block with Removable Pin instead of the Stainless Steel Pulley Block with Nylon Sheave?▾
What material and finish does the Stainless Steel Pulley Block with Removable Pin have?▾
What standard and certificate come with the Stainless Steel Pulley Block with Removable Pin?▾
What can the Stainless Steel Pulley Block with Removable Pin be connected to?▾
How do I inspect the Stainless Steel Pulley Block with Removable Pin before use?▾
What are the typical applications of the Stainless Steel Pulley Block with Removable Pin?▾
Can I buy the Stainless Steel Pulley Block with Removable Pin from Indus ex-stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Snatch block vs pulley block: what the block really carries, and how to size the sheave
A snatch block opens at the side so a rope can be dropped in without threading the end through. That is its whole difference from a pulley block — but either one can carry nearly twice the line pull, depending on the angle. Here is how to work out the block load, size the sheave and count the parts of line.
8 min read
Lifting & rigging
Crosby pattern numbers decoded: G-209, G-2130, S-320 and what the letters mean
G-209, S-209, G-2130, A-342 — Crosby’s catalogue numbers have become the trade’s shorthand for rigging shapes. The letter tells you the finish or material; the number tells you the shape. Here is the key, a table of the common numbers, and why a part made to a Crosby pattern is not a Crosby part.
4 min read








