Stainless Steel Pulley Block with Nylon Sheave
Stainless Steel Pulley Block with Nylon Sheave, in 2 sizes, 25 mm. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Pulley Block with Nylon Sheave
- Size range: 25 mm
- Size range
- 25 mm
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Snatch blocks and pulley blocks change the direction of a rope or multiply a line pull. Type 304 or type 316 stainless steel, polished.
Sizes
2 sizes, 25 mm. Available as: plain, with becket. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing for each type, shown with this product.
Choosing a size
Rate the block for the load it actually sees: with the rope turned through 180° it carries about twice the line pull. Match the sheave to the rope diameter.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Pulley Block with Nylon Sheave |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 25 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
2 sizes| Indus part no. | Size | Type | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-BP-SSPBNS-25MM-P | 25 mm | Plain | 45 | 26 | 9.5 | 11 | 1 | 0.018 |
| IH-LR-BP-SSPBNS-25MM-B | 25 mm | With becket | 60 | 26 | 9 | 11 | 1 | 0.024 |
Size — Nominal size as the manufacturer states it. Type — Manufacturer type within the size. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel pulley block with nylon sheave come in?▾
Can a snatch block be used for lifting?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Pulley Block with Removable Pin
Single Sheave Swivel Pulley Block
Single Sheave Snatch Block with Shelf
Steel Pulley Block
Wooden Pulley with Eye Fixed Bow
Wooden Shell Snatch Block
Light Tail-Board Snatch Block — 404 Pattern
