Stainless Steel JIC 37° Male Plug
Stainless Steel JIC 37° Male Plug in 316L stainless steel, forged. 13 part numbers, 1/8" to 2"; the size table gives the size, dimensions in millimetres and the Parker equivalent for every Indus part number.
Key features
- Body Configuration: plug
- Port A Thread: 37° JIC, 1/8" to 2" (5/16-24 to 2-1/2-12)
- Port A Sealing: 37° flare, a metal-to-metal seat on a 74° included cone
- Nominal Size Range: 1/8" to 2"
- Max Working Pressure: Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table
- Body Configuration
- plug
- Port A Thread
- 37° JIC, 1/8" to 2" (5/16-24 to 2-1/2-12)
- Port A Sealing
- 37° flare, a metal-to-metal seat on a 74° included cone
Product description
The Stainless Steel JIC 37° Male Plug is a plug in 316L stainless steel, forged from one piece. It carries a 37° JIC male end. Stainless steel is chosen where corrosion rules out zinc-plated carbon steel: offshore and marine lines, chemical, fertiliser and petroleum plant, and food, beverage and pharmaceutical process equipment.
Construction
- Body: plug
- End 1: 37° JIC male
- Material: 316L stainless steel, forged
Ends and sealing
- 37° JIC: 37° flare, a metal-to-metal seat on a 74° included cone; SAE J514 / ISO 8434-2.
Sizes
13 part numbers, 1/8" to 2". The Sizes & Part Numbers tab lists the size, dimensions in millimetres and the Parker equivalent for every one.
- End 1: 1/8" JIC 37° (5/16-24) to 2" JIC 37° (2-1/2-12)
Pressure rating
Manufacturer's published ratings (SAE J514), from 1,000 to 5,000 psi depending on size and end:
| Nom. SAE Dash Size | Nom. Tube O.D. Inches | 37 Degree Flare Straight Thread | Nom. Pipe Size | SAE St. Threads Union & Bulkhead (PSI) | Fittings With Pipe Threads (PSI) |
|---|---|---|---|---|---|
| 2 | 1/8 | 5/16-24 | 1/8 | 5000 | 5000 |
| 3 | 3/16 | 3/8-24 | 1/8 | 5000 | 5000 |
| 4 | 1/4 | 7/16-20 | 1/8 | 5000 | 5000 |
| 5 | 5/16 | 1/2-20 | 1/8 | 5000 | 5000 |
| 6 | 3/8 | 9/16-18 | 1/4 | 5000 | 5000 |
| 8 | 1/2 | 3/4-16 | 3/8 | 4500 | 4000 |
| 10 | 5/8 | 7/8-14 | 1/2 | 3500 | 3000 |
| 12 | 3/4 | 1 1/16-12 | 3/4 | 3500 | 3000 |
| 14 | 7/8 | 1 3/16-12 | 3/4 | 3000 | 2500 |
| 16 | 1 | 1 5/16-12 | 1 | 3000 | 2000 |
| 20 | 1 1/4 | 1 5/8-12 | 1 1/4 | 2500 | 1150 |
| 24 | 1 1/2 | 1 7/8-12 | 1 1/2 | 2000 | 1000 |
| 32 | 2 | 2 1/2-12 | 2 | 1500 | 1000 |
NOTE: Since many factors influence the pressure at which a system will or will not perform satisfactory, values shown in this table should not be construed as guaranteed minimum.
Parker equivalents
For 13 of the 13 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.
Carbon-steel version
The same configuration in zinc-plated carbon steel: Plug JIC.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end and the material, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | plug |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | 37° JIC, 1/8" to 2" (5/16-24 to 2-1/2-12) |
| Port A Sealing | 37° flare, a metal-to-metal seat on a 74° included cone |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel, forged |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2, ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
13 sizesEquivalent to Parker PNTX-SS, Aeroquip 259-900599 / 256-900599 and SSP J#P (SAE 70109, MS51518). Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Aeroquip equivalent | SSP equivalent | SAE no. | MS no. | Thread | Y (mm) | D (mm) | L (mm) |
|---|---|---|---|---|---|---|---|---|---|
| IH-SS-2408-02 | 2 PNTX-SS | 259-900599-2 | J2P | 70109 | MS51518 | 1/8" JIC 37° (5/16-24) | 11.1 | 1.6 | 17.8 |
| IH-SS-2408-03 | 3 PNTX-SS | 259-900599-3 | J3P | 70109 | MS51518 | 3/16" JIC 37° (3/8-24) | 11.1 | 3.2 | 18.5 |
| IH-SS-2408-04 | 4 PNTX-SS | 259-900599-4 | J4P | 70109 | MS51518 | 1/4" JIC 37° (7/16-20) | 12.7 | 4.4 | 20.3 |
| IH-SS-2408-05 | 5 PNTX-SS | 259-900599-5 | J5P | 70109 | MS51518 | 5/16" JIC 37° (1/2-20) | 14.3 | 5.9 | 20.3 |
| IH-SS-2408-06 | 6 PNTX-SS | 259-900599-6 | J6P | 70109 | MS51518 | 3/8" JIC 37° (9/16-18) | 15.9 | 7.5 | 21.3 |
| IH-SS-2408-08 | 8 PNTX-SS | 259-900599-8 | J8P | 70109 | MS51518 | 1/2" JIC 37° (3/4-16) | 20.7 | 9.9 | 23.9 |
| IH-SS-2408-10 | 10 PNTX-SS | 259-900599-10 | J10P | 70109 | MS51518 | 5/8" JIC 37° (7/8-14) | 23.8 | 12.3 | 27.9 |
| IH-SS-2408-12 | 12 PNTX-SS | 259-900599-12 | J12P | 70109 | MS51518 | 3/4" JIC 37° (1-1/16-12) | 28.6 | 15.5 | 32.5 |
| IH-SS-2408-14 | 14 PNTX-SS | 256-900599-14 | J14P | 70109 | MS51518 | 7/8" JIC 37° (1-3/16-12) | 31.8 | 18.3 | 33.3 |
| IH-SS-2408-16 | 16 PNTX-SS | 259-900599-16 | J16P | 70109 | MS51518 | 1" JIC 37° (1-5/16-12) | 34.9 | 21.4 | 33.8 |
| IH-SS-2408-20 | 20 PNTX-SS | 259-900599-20 | J20P | 70109 | MS51518 | 1-1/4" JIC 37° (1-5/8-12) | 42.9 | 27.4 | 36.8 |
| IH-SS-2408-24 | 24 PNTX-SS | 259-900599-24 | J24P | 70109 | MS51518 | 1-1/2" JIC 37° (1-7/8-12) | 50.8 | 33.4 | 41.9 |
| IH-SS-2408-32 | 32 PNTX-SS | 259-900599-32 | J32P | 70109 | MS51518 | 2" JIC 37° (2-1/2-12) | 66.7 | 45.2 | 52.1 |
Y — Hex across flats — printed "Y HEX" on the manufacturer drawing. D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
Can I match a Parker part number?▾
Is there a carbon-steel version?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- JIC 37° Bördel Verschlussstopfen
- fr
- JIC cône 37° bouchon mâle
- es
- JIC cono 37° tapón macho
- it
- JIC cono 37° tappo
Engineers viewing this also looked at
Stainless Steel JIC 37° Male Union 90° Elbow
Stainless Steel JIC 37° Male × NPT Male 90° Elbow
Stainless Steel JIC 37° Male × NPT Male 90° Elbow, Long
Stainless Steel JIC 37° Male × NPT Female 90° Elbow
Stainless Steel JIC 37° Male × NPT Male 45° Elbow
Stainless Steel JIC 37° Male Union 45° Elbow
Stainless Steel JIC 37° Male × NPT Male Branch Tee
