What is it made from?

316L stainless steel, forged. The manufacturer states the material on every part in this family.

What pressure is it rated to?

The manufacturer publishes SAE J514 ratings from 1,000 to 5,000 psi; the table on this page gives the figure for each size. Treat them as the manufacturer's figures, not a guaranteed minimum.

37° JIC: 37° flare, a metal-to-metal seat on a 74° included cone; NPT: taper pipe thread that seals on the thread flanks, with sealant or tape.

Can I match a Parker part number?

Yes, for 10 of the 10 sizes. The size table shows the Parker part number the manufacturer cross-references next to the Indus part number.

Is there a carbon-steel version?

Yes: Steel JIC 37° Male × NPTF Female Branch Tee, in zinc-plated carbon steel, is listed separately.

What is the lead time?

Price and lead time are confirmed with the quotation. Tell us if the job is urgent and we will say so before you order.

INDUS HYDRAULICSIH-SS-2602

Stainless Steel JIC 37° Male × NPT Female Branch Tee

Name: Stainless Steel JIC 37° Male × NPT Female Branch Tee
Brand: Indus Hydraulics
SKU: IH-SS-2602

Stainless Steel JIC AdaptersEx-stock · delivery in 3 days

VIEW 01·Stainless steel JIC 37° male × NPT female branch tee, 316L, top view

1 / 4

Stainless Steel JIC 37° Male × NPT Female Branch Tee in 316L stainless steel, forged. 10 part numbers, 1/8" to 1"; the size table gives the size on each end, dimensions in millimetres and the Parker equivalent for every Indus part number.

Key features

Body Configuration: branch tee
Port A Thread: 37° JIC, 1/8" to 1" (5/16-24 to 1-5/16-12)
Port A Sealing: 37° flare, a metal-to-metal seat on a 74° included cone
Nominal Size Range: 1/8" to 1"
Max Working Pressure: Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table

Body Configuration: branch tee
Port A Thread: 37° JIC, 1/8" to 1" (5/16-24 to 1-5/16-12)
Port A Sealing: 37° flare, a metal-to-metal seat on a 74° included cone

Enquire on WhatsApp Email for a quotation

Ships in 24h

Order before 14:00 GST · Jebel Ali

24-month warranty

Manufacturer-backed · genuine parts

Engineering support

A real applications engineer

Product description

The Stainless Steel JIC 37° Male × NPT Female Branch Tee is a branch tee in 316L stainless steel, forged from one piece. It carries a 37° JIC male end and a 37° JIC male end and an NPT female end. Stainless steel is chosen where corrosion rules out zinc-plated carbon steel: offshore and marine lines, chemical, fertiliser and petroleum plant, and food, beverage and pharmaceutical process equipment.

Construction

Body: branch tee
End 1: 37° JIC male
End 2: 37° JIC male
End 3: NPT female
Material: 316L stainless steel, forged

Ends and sealing

37° JIC: 37° flare, a metal-to-metal seat on a 74° included cone; SAE J514 / ISO 8434-2.
NPT: taper pipe thread that seals on the thread flanks, with sealant or tape; ASME B1.20.1.

Sizes

10 part numbers, 1/8" to 1". The Sizes & Part Numbers tab lists the size on each end, dimensions in millimetres and the Parker equivalent for every one.

End 1: 1/8" JIC 37° (5/16-24) to 1" JIC 37° (1-5/16-12)
End 2: 1/8" JIC 37° (5/16-24) to 1" JIC 37° (1-5/16-12)
End 3: 1/8" NPT (1/8-27) to 1" NPT (1-11.5)

Pressure rating

Manufacturer's published ratings (SAE J514), from 1,000 to 5,000 psi depending on size and end:

Nom. SAE Dash Size	Nom. Tube O.D. Inches	37 Degree Flare Straight Thread	Nom. Pipe Size	SAE St. Threads Union & Bulkhead (PSI)	Fittings With Pipe Threads (PSI)
2	1/8	5/16-24	1/8	5000	5000
3	3/16	3/8-24	1/8	5000	5000
4	1/4	7/16-20	1/8	5000	5000
5	5/16	1/2-20	1/8	5000	5000
6	3/8	9/16-18	1/4	5000	5000
8	1/2	3/4-16	3/8	4500	4000
10	5/8	7/8-14	1/2	3500	3000
12	3/4	1 1/16-12	3/4	3500	3000
14	7/8	1 3/16-12	3/4	3000	2500
16	1	1 5/16-12	1	3000	2000
20	1 1/4	1 5/8-12	1 1/4	2500	1150
24	1 1/2	1 7/8-12	1 1/2	2000	1000
32	2	2 1/2-12	2	1500	1000

NOTE: Since many factors influence the pressure at which a system will or will not perform satisfactory, values shown in this table should not be construed as guaranteed minimum.

Parker equivalents

For 10 of the 10 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.

Carbon-steel version

The same configuration in zinc-plated carbon steel: Steel JIC 37° Male × NPTF Female Branch Tee.

How to order

Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end and the material, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.

Identification

Parameter	Value
Body Configuration	branch tee

Port A

Parameter	Value
Port A Thread	37° JIC, 1/8" to 1" (5/16-24 to 1-5/16-12)
Port A Sealing	37° flare, a metal-to-metal seat on a 74° included cone
Port A Gender	male

Port B

Parameter	Value
Port B Thread	37° JIC, 1/8" to 1" (5/16-24 to 1-5/16-12)
Port B Sealing	37° flare, a metal-to-metal seat on a 74° included cone
Port B Gender	male

Port C

Parameter	Value
Additional Ports	NPT female

Dimensions

Parameter	Value
Nominal Size Range	1/8" to 1"

Performance

Parameter	Value
Max Working Pressure	Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table

Construction

Parameter	Value
Material	316L stainless steel, forged

Compliance

Parameter	Value
Applicable Standards	SAE J514, ISO 8434-2, ASME B1.20.1

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Sizes & part numbers

10 sizes

Equivalent to Parker OTX-SS, Aeroquip 259-2031 and SSP J#TTF (SAE 70427, MS51513). Every size below prints its equivalent part number beside ours — quote either.

Indus part no.	Parker equivalent	Aeroquip equivalent	SSP equivalent	SAE no.	MS no.	End 1	End 2	End 3	Y (mm)	D1 (mm)	D2 (mm)	D3 (mm)	M1 (mm)	M2 (mm)	M3 (mm)
IH-SS-2602-02-02-02	2 OTX-SS	259-2031-2-2	J2TTF	70427	MS51513	1/8" JIC 37° (5/16-24)	1/8" JIC 37° (5/16-24)	1/8" NPT (1/8-27)	—	—	—	—	—	—	—
IH-SS-2602-04-04-02	4 OTX-SS	259-2031-2-4	J4TTF	70427	MS51513	1/4" JIC 37° (7/16-20)	1/4" JIC 37° (7/16-20)	1/8" NPT (1/8-27)	14.3	4.4	4.4	8.4	27.4	27.4	16.8
IH-SS-2602-04-04-04	4-4-4 OTX-SS	259-2031-4-4	J4-4-4TTF	70427	MS51513	1/4" JIC 37° (7/16-20)	1/4" JIC 37° (7/16-20)	1/4" NPT (1/4-18)	19	4.4	4.4	10.9	31	31	22.4
IH-SS-2602-06-06-04	6 OTX-SS	259-2031-4-6	J6TTF	70427	MS51513	3/8" JIC 37° (9/16-18)	3/8" JIC 37° (9/16-18)	1/4" NPT (1/4-18)	19	7.5	7.5	10.9	31.2	31.2	22.4
IH-SS-2602-06-06-06	6-6-6 OTX-SS	259-2031-6-6	J6-6-6TTF	70427	MS51513	3/8" JIC 37° (9/16-18)	3/8" JIC 37° (9/16-18)	3/8" NPT (3/8-18)	22.2	7.5	7.5	14.2	33.3	33.3	25.9
IH-SS-2602-08-08-06	8 OTX-SS	259-2031-6-8	J8TTF	70427	MS51513	1/2" JIC 37° (3/4-16)	1/2" JIC 37° (3/4-16)	3/8" NPT (3/8-18)	22.2	9.9	9.9	14.2	36.1	36.1	25.9
IH-SS-2602-08-08-08	8-8-8 OTX-SS	259-2031-8-8	J8-8-8TTF	70427	MS51513	1/2" JIC 37° (3/4-16)	1/2" JIC 37° (3/4-16)	1/2" NPT (1/2-14)	27	9.9	9.9	17.8	38.6	38.6	31.2
IH-SS-2602-10-10-08	10 OTX-SS	259-2031-8-10	J10TTF	70427	MS51513	5/8" JIC 37° (7/8-14)	5/8" JIC 37° (7/8-14)	1/2" NPT (1/2-14)	27	12.3	12.3	17.8	41.7	41.7	31.2
IH-SS-2602-12-12-12	12 OTX-SS	259-2031-12-12	J12TTF	70427	MS51513	3/4" JIC 37° (1-1/16-12)	3/4" JIC 37° (1-1/16-12)	3/4" NPT (3/4-14)	33.4	15.5	15.5	22.9	48	48	34.5
IH-SS-2602-16-16-16	16 OTX-SS	259-2031-16-16	J16TTF	70427	MS51513	1" JIC 37° (1-5/16-12)	1" JIC 37° (1-5/16-12)	1" NPT (1-11.5)	41.3	21.4	21.4	29	55.1	55.1	41.1

End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Y — Hex across flats — printed "Y HEX" on the manufacturer drawing. D1 — Dimension D1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. D3 — Dimension D3 on the manufacturer dimension drawing. M1 — Dimension M1 on the manufacturer dimension drawing. M2 — Dimension M2 on the manufacturer dimension drawing. M3 — Dimension M3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.

Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.

Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.

This listing is matched size by size to the series below. The size table gives the exact equivalent part number for every Indus part number.

Maker / standard	Series	Sizes matched
Parker	OTX-SS	10
Aeroquip	259-2031	10
SSP	J#TTF	10
SAE	70427	10
MS	MS51513	10

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de: T-Stück JIC Außengewinde 37° Bördel auf NPT Innengewinde
fr: té JIC mâle cône 37° sur NPT femelle
es: te JIC macho cono 37° a NPT hembra
it: raccordo a T JIC maschio cono 37° a NPT femmina

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at

IH-SS-2603

Stainless Steel JIC 37° Male × NPT Female Branch Tee

Key features

Product description

Construction

Ends and sealing

Sizes

Pressure rating

Parker equivalents

Carbon-steel version

How to order

Identification

Port A

Port B

Port C

Dimensions

Performance

Construction

Compliance

Shipping & lead time

Sizes & part numbers

Engineers viewing this also looked at

Stainless Steel JIC 37° Male Union Tee

Stainless Steel JIC 37° Male × NPT Male Run Tee

Stainless Steel JIC 37° Male × NPT Female Run Tee

Stainless Steel JIC 37° Male Union Cross

Stainless Steel JIC 37° Male Bulkhead Union

Stainless Steel JIC 37° Male Bulkhead Union 90° Elbow

Stainless Steel JIC 37° Male Bulkhead Union 45° Elbow

Stainless Steel JIC 37° Male Bulkhead Branch Tee