Stainless Steel G Hook — Egg Type
Stainless Steel G Hook, in 2 sizes, 24 mm to 37.35 mm, WLL 3 to 6 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Stainless Steel G Hook
- Size range: 24 mm to 37.35 mm
- Working load limit: 3 to 6 t
- Size range
- 24 mm to 37.35 mm
- Working load limit
- 3 to 6 t
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Snap hooks and quick links make fast, light connections on lanyards, chain and light rigging. Type 304 or type 316 stainless steel, polished.
Sizes and ratings
2 sizes, 24 mm to 37.35 mm. Working load limit 3 to 6 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Cast.
- Rated with a 5:1 design factor between working load limit and minimum breaking load.
Choosing a size
Use them within their published WLL, which is light, and close a screw-lock gate fully before loading. For lifting loads use rated shackles, hooks and master links.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel G Hook |
| Sizes | 2 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 24 mm to 37.35 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 3 to 6 t |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
2 sizes| Indus part no. | Size | WLL 5:1 (t) | A (mm) | B (mm) | C (mm) | D (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| IH-LR-SN-SSGHE-24MM | 24 mm | 3 | 115 | 70 | 17 | 24 | 0.9 |
| IH-LR-SN-SSGHE-37P35MM | 37.35 mm | 6 | 178 | 107.2 | 25 | 37.35 | 2.9 |
Size — Nominal size as the manufacturer states it. WLL 5:1 — Working load limit at a 5:1 design factor, as published. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel g hook come in?▾
What is the working load limit?▾
Are snap hooks and quick links for overhead lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Long Arm S Hook
Stainless Steel Long Quick Link
Stainless Steel Quick Link
Stainless Steel Repair Lap Link
Stainless Steel S Hook
Stainless Steel Square Spring Snap Hook
Stainless Steel Swivel Locking Snap Hook
