Stainless Steel Square Spring Snap Hook
Stainless Steel Square Spring Snap Hook, in 1 size, 1*65, WLL 60 kg. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Square Spring Snap Hook
- Size range: 1*65
- Working load limit: 60 kg
- Size range
- 1*65
- Working load limit
- 60 kg
- Material
- Type 304 or type 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel Square Spring Snap Hook for tension, lashing and fixing duty. Type 304 or type 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
1 size, 1*65. Working load limit 60 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Precision cast.
Choosing a size
Use them within their published WLL, which is light, and close a screw-lock gate fully before loading. For lifting loads use rated shackles, hooks and master links.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Square Spring Snap Hook |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 1*65 |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 60 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304 or type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
1 size| Indus part no. | Size | WLL (kg) | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| IH-LR-SN-SSSHSS-165 | 1*65 | 60 | 66 | 27 | 4.2 | 9 | 12 | 0.028 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel square spring snap hook come in?▾
Can it be used for lifting?▾
Are snap hooks and quick links for overhead lifting?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Swivel Locking Snap Hook
Snap Hook — Zinc Plated
Stainless Steel Swivel Trigger Snap Hook
Stainless Steel Wide S Hook Asymmetric
Quick Link, 4× WLL Breaking Load — Zinc Plated
Quick Link — Zinc Plated
Wide Jaw Quick Link — Zinc Plated
