Stainless Steel Long Arm S Hook
Stainless Steel Long Arm S Hook, in 5 sizes, 5 mm to 10 mm. Not for overhead lifting. Indus part numbers.
Key features
- Product type: Stainless Steel Long Arm S Hook
- Size range: 5 mm to 10 mm
- Size range
- 5 mm to 10 mm
- Material
- Type 304/Type 316 stainless steel
- Finish
- Polished
Product description
Stainless Steel Long Arm S Hook for tension, lashing and fixing duty. Type 304/Type 316 stainless steel, polished.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
5 sizes, 5 mm to 10 mm. Every size has its own Indus part number in the table below.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Stamping / machining.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Long Arm S Hook |
| Sizes | 5 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 10 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Type 304/Type 316 stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Size | D (mm) | E1 (mm) | L (mm) | E2 (mm) | W2 (mm) |
|---|---|---|---|---|---|---|
| IH-LR-SN-SSLASH-5MM | 5 mm | 5 | 9.5 | 52 | 2 | 9 |
| IH-LR-SN-SSLASH-6MM | 6 mm | 6 | 12.5 | 59.5 | 6 | 10.5 |
| IH-LR-SN-SSLASH-8MM | 8 mm | 8 | 18 | 75 | 12.5 | 16.5 |
| IH-LR-SN-SSLASH-9MM | 9 mm | 9 | 18 | 86 | 8.5 | 18 |
| IH-LR-SN-SSLASH-10MM | 10 mm | 10 | 20.5 | 95 | 8.5 | 20 |
Size — Nominal size as the manufacturer states it. D — Dimension D on the manufacturer dimension drawing. E1 — Dimension E1 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. E2 — Dimension E2 on the manufacturer dimension drawing. W2 — Dimension W2 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel long arm s hook come in?▾
Can it be used for lifting?▾
Are snap hooks and quick links for overhead lifting?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Long Quick Link
Stainless Steel Quick Link
Stainless Steel Repair Lap Link
Stainless Steel S Hook
Stainless Steel Square Spring Snap Hook
Stainless Steel Swivel Locking Snap Hook
Snap Hook — Zinc Plated
