Skip to content
SUNPOOLIH-STZ-STORZ-ADAPTER-MALE-THREAD-3· MADE IN TAIWAN

SS Storz Adapter-Male Thread

Storz Couplings & AdaptersEx-stock · delivery in 3 days
Stainless steel Storz adapter with male thread
VIEW 01·Stainless steel Storz adapter with male thread

SS Storz Adapter-Male Thread — stainless steel Storz adapter to a male NPT, BSP or NST thread. Sizes 1-1/2"–5". SS 304 or 316. Supplied by Sunpool (Taiwan); RFQ-only via Indus Hydraulics authorised distribution.

Key features

  • Coupling Family: Storz Coupling / Adapter
  • Coupling Type / Variant: Storz Coupling & Adapter — Storz Adapter-Male Thread
  • End A Configuration: Storz head
  • End B Configuration: Male thread — NPT, BSP or NST
  • Size Range: 1-1/2" to 5"
Coupling Family
Storz Coupling / Adapter
Coupling Type / Variant
Storz Coupling & Adapter — Storz Adapter-Male Thread
End A Configuration
Storz head
End B Configuration
Male thread — NPT, BSP or NST
Size Range
1-1/2" to 5"
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The SS Storz Adapter-Male Thread is a Storz Coupling / Adapter from the Sunpool (Taiwan) industrial coupling range. Indus Hydraulics is an authorised distributor in the UAE.

Configuration

  • Coupling family: Storz Coupling / Adapter
  • Coupling type: Storz Coupling & Adapter — Storz Adapter-Male Thread
  • End A: Storz head
  • End B: Male thread — NPT, BSP or NST

Specifications

  • Size range: 1-1/2"–5"
  • Material: SS 304 or 316
  • Working pressure: Not published by Sunpool. Give us your working pressure and medium and we will check it with the manufacturer.
  • Seal: Gasket in the Storz head; suction gasket to order (Sunpool code S)
  • Standard: Made to the DIN Storz pattern (Sunpool does not give the standard number)

Manufacturer notes

  • SS304/316 Storz adapter with NPT, BSP, or NST Male thread.
  • Conformed to DIN Standard.

About the family

Storz is a symmetrical hose coupling: every head is identical, with two hooked lugs and a ring, so there is no male or female half. Two heads of the same size are pressed face to face and turned until the lugs lock. A Storz size is identified by the distance across its lugs, which is why two heads made for nearly the same hose bore can be different sizes. Sunpool makes the range in cast aluminium (A356), forged aluminium (6061-T6), brass, bronze and stainless steel: long-shank hose couplings, thread adapters, fire department connection fittings, safety-latch couplings and adapters, gaskets and clamps.

Selection and service notes

Match the Storz size, not just the hose bore: check the lug distance or the size marking. Each joint seals on the gasket in the face of the heads, so inspect it at every make-up; Sunpool fits a discharge gasket as standard and a suction gasket to order. A safety latch stops the heads turning apart where a hose is dragged or vibrates. Storz does not connect to cam and groove, Guillemin or threaded fittings without an adapter.

How to order

Specify the size, the body material where more than one is listed, and any thread, tail or gasket variant on the RFQ. Indus engineering will confirm the manufacturer part number against your application.

Further reading: Storz coupling sizes and lug distances.

Sunpool sizes

Each Storz size is made with the male thread sizes below, in NPT, BSP or NST. Sunpool makes this adapter in 1-1/2"–5". The size table lists every combination under its own Indus part number.

Storz sizeLug distance (mm)Male thread sizes
38—1", 1-1/4", 1-1/2", 2"
52C661", 1-1/4", 1-1/2", 2", 2-1/2"
65811", 1-1/4", 1-1/2", 2", 2-1/2", 3"
75B892", 2-1/2", 3"
110A1333", 4", 5"
1251485"

Sizes and dimensions from Sunpool’s catalogue page for this part, checked 7 October 2026.

Identification

ParameterValue
Coupling FamilyStorz Coupling / Adapter
Coupling Type / VariantStorz Coupling & Adapter — Storz Adapter-Male Thread

Configuration

ParameterValue
End A ConfigurationStorz head
End B ConfigurationMale thread — NPT, BSP or NST

Dimensions

ParameterValue
Size Range1-1/2" to 5"

Construction

ParameterValue
Materials AvailableSS 304 or 316
Seal / GasketGasket in the Storz head; suction gasket to order (Sunpool code S)

Compliance

ParameterValue
Applicable StandardsMade to the DIN Storz pattern (Sunpool does not give the standard number)

Notes

ParameterValue
NotesSS304/316 Storz adapter with NPT, BSP, or NST Male thread. Conformed to DIN Standard.

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in Taiwan

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Storz-Kupplung Außengewinde
fr
raccord Storz mâle
es
acoplamiento Storz macho
it
raccordo Storz maschio

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at