
SMC Tubing: 75 part numbers.
Product description
SMC Tubing: 75 part numbers.
Specification
- Type: Tubing
- Working pressure stated by the maker at room temperature: 8 to 23 bar (about 115 to 335 psi), on the sizes the maker rates
- Part numbers: 75
Sizes and part numbers
The Sizes & Part Numbers tab lists every SMC part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the tubing
Select tubing on outside diameter for the push-in fittings it must fit, wall and material for pressure and temperature, and colour for circuit identification. Working pressure falls as temperature rises — check the maker rating at the operating temperature.
How to order
Quote the SMC part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Fluid | Water, Air |
| Type | Straight |
Shipping & lead time
Sizes & part numbers
75 sizes- SMC part no.T1075B-100
- I.D. (mm)
- 7.5
- Wall (mm)
- 1.25
- Description
- SMC T nylon tube, 10 × 7.5 mm, black, 100 m roll
- Tube O.D. (mm)
- 10
- Working pressure (bar)
- 20
- SMC part no.T1075BU-20
- I.D. (mm)
- 7.5
- Wall (mm)
- 1.25
- Description
- SMC T nylon tube, 10 × 7.5 mm, blue, 20 m roll
- Tube O.D. (mm)
- 10
- Working pressure (bar)
- 20
- SMC part no.T1075G-20
- I.D. (mm)
- 7.5
- Wall (mm)
- 1.25
- Description
- SMC T nylon tube, 10 × 7.5 mm, green, 20 m roll
- Tube O.D. (mm)
- 10
- Working pressure (bar)
- 20
- SMC part no.T1075R-20
- I.D. (mm)
- 7.5
- Wall (mm)
- 1.25
- Description
- SMC T nylon tube, 10 × 7.5 mm, red, 20 m roll
- Tube O.D. (mm)
- 10
- Working pressure (bar)
- 20
- SMC part no.T1075W-100
- I.D. (mm)
- 7.5
- Wall (mm)
- 1.25
- Description
- SMC T nylon tube, 10 × 7.5 mm, white, 100 m roll
- Tube O.D. (mm)
- 10
- Working pressure (bar)
- 20
- SMC part no.T1075Y-20
- I.D. (mm)
- 7.5
- Wall (mm)
- 1.25
- Description
- SMC T nylon tube, 10 × 7.5 mm, yellow, 20 m roll
- Tube O.D. (mm)
- 10
- Working pressure (bar)
- 20
- SMC part no.T1209B-100
- I.D. (mm)
- 9
- Wall (mm)
- 1.5
- Description
- SMC T nylon tube, 12 × 9 mm, black, 100 m roll
- Tube O.D. (mm)
- 12
- Working pressure (bar)
- 20
- SMC part no.T1209G-20
- I.D. (mm)
- 9
- Wall (mm)
- 1.5
- Description
- SMC T nylon tube, 12 × 9 mm, green, 20 m roll
- Tube O.D. (mm)
- 12
- Working pressure (bar)
- 20
Show all 75 sizesShow fewer sizes
I.D. (mm) — Inside diameter in millimetres with its tolerance, as published. Wall (mm) — Wall thickness in millimetres, as published — a single figure or a band. Description — What this part number is, as the manufacturer lists it. Tube O.D. — Outside diameter of the tube the port is cut for. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What does the SMC Tubing listing cover?▾
How do you tell the SMC series apart on the SMC Tubing listing by part number?▾
Which large nylon sizes are on the SMC Tubing listing?▾
Which inch SMC TIH FEP tubing sizes are listed on SMC Tubing?▾
What pressure ratings apply to the tubes on the SMC Tubing listing?▾
What is SMC antistatic TAU and TAS tubing used for?▾
Are the SMC tubes on the SMC Tubing listing RoHS compliant?▾
Which fittings suit the tubes on the SMC Tubing listing?▾
What does SMC advise on installing large T1613 nylon tubing?▾
What is SMC TQ two-layer soft fluoropolymer tubing?▾
Where is SMC tubing on this listing shipped from?▾
Do you stock the SMC tubing part numbers on this listing in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared
Nylon holds pressure, polyurethane bends, polyolefin stays clean and fluoropolymer takes heat and chemicals — and every one of them loses pressure rating as it warms. How the four families compare on SMC’s own data, how far ratings fall with temperature, minimum bend radius, why inch and metric tube are not interchangeable, and when to specify flame-resistant, antistatic or clean-room tubing.
12 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read







