Nycoil Tubings

Nycoil Tubings in nylon: 5 part numbers.
Product description
Nycoil Tubings in nylon: 5 part numbers.
Specification
- Type: Tubing
- Material: Nylon
- Pressure stated by the maker: 267 to 400 psi (18 to 28 bar), by size
- Temperature: -4°F to +175°F
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Nycoil part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the tubing
Select tubing on outside diameter for the push-in fittings it must fit, wall and material for pressure and temperature, and colour for circuit identification. Working pressure falls as temperature rises — check the maker rating at the operating temperature.
How to order
Quote the Nycoil part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application | Air |
| Autoclavable | No |
| Clarity | Opaque |
| Fitting Compatibility | Compression, Push to Connect |
| Flexibility | Semi Flexible |
| Hardness | Shore D 60 |
| Industry Application | Automation |
| Material | Nylon |
| Peristaltic Pump Compatible | No |
| Resistance Properties | Chemical Resistant, Humidity Resistant |
| Stripe Color | No Stripe |
| Temp. | -4°F to +175°F |
| Tolerance | -0.004" to +0.002" |
Shipping & lead time
Sizes & part numbers
5 sizes- Nycoil part no.2VDK8
- Wall (mm)
- 0.03"
- Description
- Tubing 5/32 Inch Outer Diameter Nylon Black 50 Feet
- Working pressure (bar)
- 23
- Nycoil part no.2VDX6
- Wall (mm)
- 0.03"
- Description
- Tubing 1/4 Inch Outer Diameter Nylon Green 100 Feet
- Working pressure (bar)
- 28
- Nycoil part no.61662
- Wall (mm)
- 0.05"
- Description
- Tubing 3/8 Inch Outer Diameter Nylon Red 100 Feet
- Working pressure (bar)
- 23
- Nycoil part no.61884
- Wall (mm)
- 0.06"
- Description
- Tubing 1/2 Inch Outer Diameter Nylon Green 100 Feet
- Working pressure (bar)
- 18
- Nycoil part no.4HHF4
- Wall (mm)
- 1 mm
- Description
- Tubing 4mm Inch Id 6mm Inch Outer Diameter 100 Feet Blue
- Working pressure (bar)
- 28
Wall (mm) — Wall thickness in millimetres, as published — a single figure or a band. Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is Nycoil nylon tubing used for?▾
What sizes does Nycoil nylon tubing come in?▾
Which Nycoil tube suits a 1/4" or 6 mm push-in fitting?▾
What pressure is Nycoil nylon tubing rated for?▾
What temperature range is Nycoil nylon tubing rated for?▾
What documents come with Nycoil tubing?▾
Which fittings work with Nycoil nylon tubing?▾
What tolerance and handling does Nycoil nylon tubing need?▾
Where is Nycoil nylon tubing used?▾
What is the difference between Nycoil nylon and polyurethane air tubing?▾
What is the origin and HS code of Nycoil tubing?▾
Do you stock Nycoil nylon tubing in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared
Nylon holds pressure, polyurethane bends, polyolefin stays clean and fluoropolymer takes heat and chemicals — and every one of them loses pressure rating as it warms. How the four families compare on SMC’s own data, how far ratings fall with temperature, minimum bend radius, why inch and metric tube are not interchangeable, and when to specify flame-resistant, antistatic or clean-room tubing.
12 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read








