SMC TS Series Soft Nylon Tubing

SMC TS Series Soft Nylon Tubing: 53 part numbers.
Product description
SMC TS Series Soft Nylon Tubing: 53 part numbers.
Specification
- Type: Tubing
- Temperature: -40 to +100°C with air; water 0 to +50°C
- Part numbers: 53
Sizes and part numbers
The Sizes & Part Numbers tab lists every SMC part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the tubing
Select tubing on outside diameter for the push-in fittings it must fit, wall and material for pressure and temperature, and colour for circuit identification. Working pressure falls as temperature rises — check the maker rating at the operating temperature.
How to order
Quote the SMC part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Compatible Fluid | Water, Air |
| Fluid Type | Air |
| Hardness | Shore D 70 |
| Physical Resistance | Impact, Chemical, Abrasion, Thermal |
| Type | Straight |
| Typical Application | General Purpose Air |
Shipping & lead time
Sizes & part numbers
53 sizes- SMC part no.TS0425B-100
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, black, 100 m roll
- Tube O.D. (mm)
- 4
- SMC part no.TS0425B-20
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, black, 20 m roll
- Tube O.D. (mm)
- 4
- SMC part no.TS0425BU-100-X3
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, blue, 100 m roll (made to order)
- Tube O.D. (mm)
- 4
- SMC part no.TS0425BU-20
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, blue, 20 m roll
- Tube O.D. (mm)
- 4
- SMC part no.TS0425G-20
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, green, 20 m roll
- Tube O.D. (mm)
- 4
- SMC part no.TS0425R-100-X3
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, red, 100 m roll (made to order)
- Tube O.D. (mm)
- 4
- SMC part no.TS0425R-20
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, red, 20 m roll
- Tube O.D. (mm)
- 4
- SMC part no.TS0425W-100
- I.D. (mm)
- 2.5
- Wall (mm)
- 0.75
- Description
- SMC TS soft nylon tube, 4 × 2.5 mm, white, 100 m roll
- Tube O.D. (mm)
- 4
Show all 53 sizesShow fewer sizes
I.D. (mm) — Inside diameter in millimetres with its tolerance, as published. Wall (mm) — Wall thickness in millimetres, as published — a single figure or a band. Description — What this part number is, as the manufacturer lists it. Tube O.D. — Outside diameter of the tube the port is cut for. Ask us for the dimension drawing if you need it stamped.
What is SMC TS series soft nylon tubing?▾
How do you read an SMC TS soft nylon part number such as TS0604BU-100-X3?▾
What sizes does SMC TS soft nylon tubing come in?▾
How do I pick a TS soft nylon size for a push-in fitting?▾
What pressure and temperature is SMC TS soft nylon tubing rated for?▾
Can SMC TS soft nylon tubing carry water?▾
Is SMC TS soft nylon tubing RoHS compliant?▾
Which fittings fit SMC TS soft nylon tubing?▾
What should I check when installing SMC TS soft nylon tubing?▾
What is the difference between SMC TS soft nylon and SMC TU polyurethane tubing?▾
Where is SMC TS soft nylon tubing shipped from?▾
Can I order SMC TS soft nylon tubing from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared
Nylon holds pressure, polyurethane bends, polyolefin stays clean and fluoropolymer takes heat and chemicals — and every one of them loses pressure rating as it warms. How the four families compare on SMC’s own data, how far ratings fall with temperature, minimum bend radius, why inch and metric tube are not interchangeable, and when to specify flame-resistant, antistatic or clean-room tubing.
12 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read







