Skip to content

Side Entry Trunnion Mounted Ball Valve, Soft Seated, API 6D

Trunnion Mounted Ball ValvesEx-stock · delivery in 3 days
Side entry trunnion mounted ball valve with pneumatic actuator and raised-face flanged ends
VIEW 01·Side entry trunnion mounted ball valve with pneumatic actuator and raised-face flanged ends

Side-entry trunnion mounted ball valves to API 6D: NPS 2" to 60", Class 150 to 2500, two- and three-piece split body, soft seats, double block and bleed, fire-safe to API 607.

Key features

  • Valve type: Trunnion mounted ball valve, soft seated
  • Construction: Side entry, two- or three-piece split body
  • Design standard: API 6D, ASME B16.34
  • Size range: NPS 2" to 60" (DN50 to DN1500)
  • Pressure class: ASME Class 150 to 2500
  • Body material: Carbon steel, stainless steel, alloy steel, duplex
  • End connections: RF, RTJ flanged; butt-weld; hub
  • Operation: Lever, gear operator, pneumatic, electric or hydraulic actuator
Valve type
Trunnion mounted ball valve, soft seated
Design standard
API 6D, ASME B16.34
Pressure class
ASME Class 150 to 2500
End connections
RF, RTJ flanged; butt-weld; hub
Operation
Lever, gear operator, pneumatic, electric or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The standard pipeline and large-bore process ball valve. A two- or three-piece split body, forged or cast, carries a trunnion-supported ball between spring-loaded soft seats. Each seat seals on its own, giving double block and bleed with the body cavity vented.

In a trunnion mounted ball valve the ball turns on fixed stem and trunnion bearings while spring-loaded seats move onto it. Operating torque stays low at large sizes and high pressure, and each seat seals independently.

Construction

  • Two-piece or three-piece split body, forged or cast
  • Trunnion-supported ball, spring-loaded soft-insert seats
  • Double block and bleed; automatic body-cavity relief
  • Emergency seat and stem sealant injection, drain and vent

Sizes and ratings

Published range: NPS 2" to 60" (DN50 to DN1500), ASME Class 150 to 2500, in carbon steel, stainless steel, alloy steel, duplex. End connections: RF, RTJ flanged; butt-weld; hub. Operation: lever, gear operator, pneumatic, electric or hydraulic actuator.

The size table below lists 139 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire. Figures are as published; confirm critical dimensions against the general arrangement drawing issued with the order.

Testing and documents

Hydrostatic shell and seat tests to API 6D, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Trunnion mounted ball valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other trunnion mounted ball valves in the range, for comparison when the duty is not settled yet: Top Entry Trunnion Mounted Ball Valve, API 6D, Fully Welded Trunnion Mounted Ball Valve, API 6D, Metal Seated Trunnion Mounted Ball Valve, Trunnion Mounted Double Block and Bleed Compact Ball Valve.

Identification

ParameterValue
Valve typeTrunnion mounted ball valve, soft seated
ConstructionSide entry, two- or three-piece split body

Standards

ParameterValue
Design standardAPI 6D, ASME B16.34
Fire-safe designAPI 607 / API 6FA
Pressure testingHydrostatic shell and seat tests to API 6D

Range

ParameterValue
Size rangeNPS 2" to 60" (DN50 to DN1500)
Pressure classASME Class 150 to 2500
Temperature range-46 °C to 200 °C

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex
Seat and trimSpring-loaded soft-insert seats

Construction

ParameterValue
End connectionsRF, RTJ flanged; butt-weld; hub
OperationLever, gear operator, pneumatic, electric or hydraulic actuator

Application

ParameterValue
Typical servicePipelines, gas plants, large-bore process

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at