Skip to content

Metal Seated Trunnion Mounted Ball Valve

Trunnion Mounted Ball ValvesEx-stock · delivery in 3 days
Metal seated trunnion mounted ball valve with red pneumatic actuator on a stainless body
VIEW 01·Metal seated trunnion mounted ball valve with red pneumatic actuator on a stainless body

Side-entry metal seated trunnion mounted ball valves: NPS 2" to 48", Class 150 to 2500, -46 °C to 450 °C, hardfaced ball and seats for abrasive, high-temperature and severe service.

Key features

  • Valve type: Trunnion mounted ball valve, metal seated
  • Construction: Side entry, two- or three-piece split body; full or reduced bore
  • Design standard: API 6D, ASME B16.34
  • Size range: NPS 2" to 48" (DN50 to DN1200)
  • Pressure class: ASME Class 150 to 2500
  • Body material: Carbon steel, stainless steel, alloy steel, duplex
  • End connections: Flanged; butt-weld
  • Operation: Gear operator, pneumatic, electric or hydraulic actuator
Valve type
Trunnion mounted ball valve, metal seated
Design standard
API 6D, ASME B16.34
Pressure class
ASME Class 150 to 2500
End connections
Flanged; butt-weld
Operation
Gear operator, pneumatic, electric or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Trunnion mounted ball valves for the hardest duties: catalyst handling, sand-laden production, high-temperature process and emergency isolation that must still seal after years in service. The ball and seats are hardfaced and lapped as a matched set.

In a trunnion mounted ball valve the ball turns on fixed stem and trunnion bearings while spring-loaded seats move onto it. Operating torque stays low at large sizes and high pressure, and each seat seals independently.

Construction

  • Hardfaced and lapped ball and seats (tungsten carbide or chrome carbide)
  • Trunnion-supported ball, spring-loaded seats
  • Two- or three-piece split body, side entry
  • Suits on-off and emergency shutdown duty with actuator

Sizes and ratings

Published range: NPS 2" to 48" (DN50 to DN1200), ASME Class 150 to 2500, in carbon steel, stainless steel, alloy steel, duplex. End connections: Flanged; butt-weld. Operation: gear operator, pneumatic, electric or hydraulic actuator.

The size table below lists 210 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.

Testing and documents

Hydrostatic shell and seat tests to API 6D, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Metal seated trunnion ball valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other trunnion mounted ball valves in the range, for comparison when the duty is not settled yet: Trunnion Mounted Double Block and Bleed Compact Ball Valve, Pigging Ball Valve for Pig Launching and Receiving, Side Entry Trunnion Mounted Ball Valve, Soft Seated, API 6D, Top Entry Trunnion Mounted Ball Valve, API 6D.

Identification

ParameterValue
Valve typeTrunnion mounted ball valve, metal seated
ConstructionSide entry, two- or three-piece split body; full or reduced bore

Standards

ParameterValue
Design standardAPI 6D, ASME B16.34
Pressure testingHydrostatic shell and seat tests to API 6D

Range

ParameterValue
Size rangeNPS 2" to 48" (DN50 to DN1200)
Pressure classASME Class 150 to 2500
Temperature range-46 °C to 450 °C

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex
Seat and trimTungsten or chrome carbide hardfacing

Construction

ParameterValue
End connectionsFlanged; butt-weld
OperationGear operator, pneumatic, electric or hydraulic actuator

Application

ParameterValue
Typical serviceAbrasive, high-temperature and emergency shutdown service

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at