Skip to content

Fully Welded Trunnion Mounted Ball Valve, API 6D

Trunnion Mounted Ball ValvesEx-stock · delivery in 3 days
Fully welded trunnion mounted ball valve with gear operator, butt-weld pup ends and support legs
VIEW 01·Fully welded trunnion mounted ball valve with gear operator, butt-weld pup ends and support legs

Fully welded trunnion mounted ball valves to API 6D: NPS 2" to 60", Class 150 to 1500, welded body with no body joints, double block and bleed, butt-weld or flanged, stem extension for buried service.

Key features

  • Valve type: Trunnion mounted ball valve, fully welded
  • Construction: Welded forged body, no body joints
  • Design standard: API 6D, ASME B16.34
  • Size range: NPS 2" to 60" (DN50 to DN1500)
  • Pressure class: ASME Class 150 to 1500
  • Body material: Carbon steel, stainless steel, alloy steel, duplex
  • End connections: Butt-weld; RF or RTJ flanged
  • Operation: Gear operator, pneumatic, electric or electro-hydraulic actuator
Valve type
Trunnion mounted ball valve, fully welded
Design standard
API 6D, ASME B16.34
Pressure class
ASME Class 150 to 1500
End connections
Butt-weld; RF or RTJ flanged
Operation
Gear operator, pneumatic, electric or electro-hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

For pipelines, gas distribution and buried service, where a body joint is a leak path you cannot reach. The forged body halves are welded together around the ball, so there are no bolted body joints, and the valve weighs less than a bolted design.

In a trunnion mounted ball valve the ball turns on fixed stem and trunnion bearings while spring-loaded seats move onto it. Operating torque stays low at large sizes and high pressure, and each seat seals independently.

Construction

  • Welded forged body, no body joints
  • Trunnion-supported ball, spring-loaded seats, double block and bleed
  • Stem extension and sealant/vent lines for buried installation
  • Butt-weld pup pieces or flanged ends

Sizes and ratings

Published range: NPS 2" to 60" (DN50 to DN1500), ASME Class 150 to 1500, in carbon steel, stainless steel, alloy steel, duplex. End connections: Butt-weld; RF or RTJ flanged. Operation: gear operator, pneumatic, electric or electro-hydraulic actuator.

The size table below lists 132 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire.

Testing and documents

Hydrostatic shell and seat tests to API 6D, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Fully welded ball valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other trunnion mounted ball valves in the range, for comparison when the duty is not settled yet: Metal Seated Trunnion Mounted Ball Valve, Trunnion Mounted Double Block and Bleed Compact Ball Valve, Pigging Ball Valve for Pig Launching and Receiving, Side Entry Trunnion Mounted Ball Valve, Soft Seated, API 6D.

Identification

ParameterValue
Valve typeTrunnion mounted ball valve, fully welded
ConstructionWelded forged body, no body joints

Standards

ParameterValue
Design standardAPI 6D, ASME B16.34
Fire-safe designAPI 607 / API 6FA
Pressure testingHydrostatic shell and seat tests to API 6D

Range

ParameterValue
Size rangeNPS 2" to 60" (DN50 to DN1500)
Pressure classASME Class 150 to 1500
Temperature range-46 °C to 200 °C

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex
Seat and trimSpring-loaded seats, bi-directional

Construction

ParameterValue
End connectionsButt-weld; RF or RTJ flanged
OperationGear operator, pneumatic, electric or electro-hydraulic actuator

Application

ParameterValue
Typical serviceGas transmission and distribution, buried pipelines

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at