Pressure Vessel Heads

Ellipsoidal, torispherical, hemispherical and flat heads for pressure vessels and exchanger channels, to ASME VIII, EN 13445 and DIN 28011 / 28013. Made to ASME VIII Div 1 UG-32, DIN 28011 / DIN 28013, EN 13445-3. Built to your data sheet or drawing and quoted against it, with the documents and inspection your project needs.
Key features
- Product type: Pressure Vessel Heads
- Construction: Engineered to order, built to your data sheet or drawing
- Standards: ASME VIII Div 1 UG-32, DIN 28011 / DIN 28013, EN 13445-3
- Product type
- Pressure Vessel Heads
- Construction
- Engineered to order, built to your data sheet or drawing
Product description
Ellipsoidal, torispherical, hemispherical and flat heads for pressure vessels and exchanger channels, to ASME VIII, EN 13445 and DIN 28011 / 28013.
Pressure Vessel Heads are engineered equipment, not catalogue items. We quote against your data sheet or drawing, and the design, materials, inspection and documents follow the code and the specification you give us.
How we build and quote
Pressure parts are made to the drawing and the design code: ASME Section I for power boilers, Section VIII for vessels, or EN 12952, EN 12953 and EN 13445 under PED. Materials are supplied with mill certificates, welding is to qualified procedures and welders, and non-destructive examination, heat treatment and the hydrotest follow the code and the inspection and test plan. Third-party inspection and the documents the inspecting authority needs are arranged with the order.
Specification
- 2:1 ellipsoidal equivalence: ASME UG-32 accepts a torispherical head with 0.9D crown and 0.17D knuckle as a 2:1 ellipsoidal approximation
- ASME F&D knuckle minimum: 6% of OD or 3t, whichever is greater
Standards
ASME VIII Div 1 UG-32, DIN 28011 / DIN 28013, EN 13445-3. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Testing and documents
- Documentation, inspection and test plan to the order's code and specification
Where it is used
- Pressure vessels, exchanger channels and shell covers
Standard geometry
| Head type | Crown (dish) radius R | Knuckle radius r | Depth / height |
|---|---|---|---|
| 2:1 semi-ellipsoidal | 0.90 D (ASME UG-32 torispherical equivalent) | 0.17 D | Inside depth = D/4 |
| ASME flanged and dished (torispherical) | = Do (outside diameter) | 0.06 Do (not less than 3t) | Depends on R, r, t |
| Kloepper (DIN 28011, 'decimal' head) | = Do | 0.10 Do | h2 = 0.1935 Do - 0.455 t; straight flange h1 >= 3.5 t |
| Korbbogen (DIN 28013) | 0.80 Do | 0.154 Do | h2 = 0.255 Do - 0.635 t; straight flange h1 >= 3 t |
| 80/10 torispherical | 0.80 Do | 0.10 Do | - |
| Hemispherical | = D/2 (cylinder radius) | none | Depth = D/2 |
What to send for a quotation
- Drawing, or the dimensions and arrangement
- Design code (ASME Section I or VIII, EN 12952, EN 12953, EN 13445)
- Design pressure and temperature
- Material grades for tubes, plates, forgings and fittings
- NDE, heat treatment and hydrotest requirements
- Third-party inspection and the certificate the authority needs
- Quantity and delivery point
Identification
| Parameter | Value |
|---|---|
| Product type | Pressure Vessel Heads |
| Construction | Engineered to order, built to your data sheet or drawing |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASME VIII Div 1 UG-32, DIN 28011 / DIN 28013, EN 13445-3 |
Quality
| Parameter | Value |
|---|---|
| Certification | Code documentation and inspection to the order |
Dimensions
| Parameter | Value |
|---|---|
| Size table | Engineered to order: quoted from your data sheet or drawing |
Application
| Parameter | Value |
|---|---|
| Typical services | Pressure vessels, exchanger channels and shell covers |
Shipping & lead time
What are Pressure Vessel Heads used for?▾
What sizes can Pressure Vessel Heads be supplied in?▾
What do I need to send to get Pressure Vessel Heads quoted?▾
What pressure rating do Pressure Vessel Heads have?▾
What head shapes are pressure vessel heads made in?▾
What codes and materials govern Pressure Vessel Heads?▾
Which codes and standards apply to Pressure Vessel Heads?▾
What do Pressure Vessel Heads connect to or work with?▾
What inspection and documents come with Pressure Vessel Heads?▾
How do Pressure Vessel Heads differ from Boiler Headers?▾
Can Pressure Vessel Heads be supplied to customers outside the UAE?▾
Do you hold Pressure Vessel Heads in stock, or are they made to order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog




