Skip to content
IH-TF-BP-MWW

Membrane Water Walls

Boiler Pressure PartsEx-stock · delivery in 3 days
Membrane water wall panel in red primer, tubes joined by bars along a bottom header
VIEW 01·Membrane water wall panel in red primer, tubes joined by bars along a bottom header

Boiler tube panels joined by flat membrane bars welded between the tubes, for furnace walls in utility and industrial boilers and HRSGs. Membrane panels form gas-tight furnace walls: the tubes carry water or steam and the membrane bars close the gaps between them, so the furnace needs no separate casing. Panels are built in shop-assembled sections with headers, bends and openings for burners, sootblowers and inspection doors where the drawing calls for them, then hydrotested before they ship. Ma

Key features

  • Product type: Membrane Water Walls
  • Construction: Tubes joined by flat steel membrane bars welded between them
  • Standards: ASME Section I / EN 12952, ASTM A210, ASTM A192, ASTM A213 tubes; SA-36, ASTM A387 bars, ASME SA36, ASME SA387-GR12CL1, ASME SA387-GR12CL2, ASME SA387-GR22CL1, ASME SA387-GR91
Product type
Membrane Water Walls
Construction
Tubes joined by flat steel membrane bars welded between them
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Boiler tube panels joined by flat membrane bars welded between the tubes, for furnace walls in utility and industrial boilers and HRSGs.

Membrane panels form gas-tight furnace walls: the tubes carry water or steam and the membrane bars close the gaps between them, so the furnace needs no separate casing. Panels are built in shop-assembled sections with headers, bends and openings for burners, sootblowers and inspection doors where the drawing calls for them, then hydrotested before they ship.

Membrane Water Walls are engineered equipment, not catalogue items. We quote against your data sheet or drawing, and the design, materials, inspection and documents follow the code and the specification you give us.

How we build and quote

Pressure parts are made to the drawing and the design code: ASME Section I for power boilers, Section VIII for vessels, or EN 12952, EN 12953 and EN 13445 under PED. Materials are supplied with mill certificates, welding is to qualified procedures and welders, and non-destructive examination, heat treatment and the hydrotest follow the code and the inspection and test plan. Third-party inspection and the documents the inspecting authority needs are arranged with the order.

Specification

  • Construction: Tubes joined by flat steel membrane bars welded between them
  • Tube pitch ratio: s/d usually 1.2-1.5, set by pressure and furnace heat load
  • Membrane bar thickness: about 6.4 mm (1/4 in) example with 2-3 in tubes

Standards

ASME Section I / EN 12952, ASTM A210, ASTM A192, ASTM A213 tubes; SA-36, ASTM A387 bars, ASME SA36, ASME SA387-GR12CL1, ASME SA387-GR12CL2, ASME SA387-GR22CL1, ASME SA387-GR91. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Testing and documents

  • Documentation, inspection and test plan to the order's code and specification

Where it is used

  • Utility and industrial boilers, HRSGs

What to send for a quotation

  • Drawing, or the dimensions and arrangement
  • Design code (ASME Section I or VIII, EN 12952, EN 12953, EN 13445)
  • Design pressure and temperature
  • Material grades for tubes, plates, forgings and fittings
  • NDE, heat treatment and hydrotest requirements
  • Third-party inspection and the certificate the authority needs
  • Quantity and delivery point

Identification

ParameterValue
Product typeMembrane Water Walls
ConstructionTubes joined by flat steel membrane bars welded between them

Compliance

ParameterValue
StandardsASME Section I / EN 12952, ASTM A210, ASTM A192, ASTM A213 tubes; SA-36, ASTM A387 bars, ASME SA36, ASME SA387-GR12CL1, ASME SA387-GR12CL2, ASME SA387-GR22CL1, ASME SA387-GR91

Quality

ParameterValue
CertificationCode documentation and inspection to the order

Dimensions

ParameterValue
Size tableEngineered to order: quoted from your data sheet or drawing

Application

ParameterValue
Typical servicesUtility and industrial boilers, HRSGs

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at