Parker 804 Push-Lok Multipurpose Hoses

Parker 804 Push-Lok Multipurpose Hoses: 5 part numbers.
Product description
Parker 804 Push-Lok Multipurpose Hoses: 5 part numbers.
Specification
- Type: Hot Water Hose
- Material: EPDM (Ethylene Propylene Diene Monomer) Synthetic Rubber Inner Tube And Cover
- Pressure stated by the maker: 150 psi (10 bar)
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Application Type | Phosphate Ester Based Hydraulic Fluids Water Water Glycol Emulsions Air Use Liquid Soap As Lubricant |
| Design | Reinforced With High-Tensile Fiber Braidsold In Unit Of Length (Bulk)For Hot Water, Phosphate Ester, Vacuum |
| Function | Dry Air/Hot Water Industrial Hose |
| Main Function | Hose |
| Material | EPDM (Ethylene Propylene Diene Monomer) Synthetic Rubber Inner Tube And Cover |
| Sub Range Name | Push Lok Series |
Shipping & lead time
Sizes & part numbers
5 sizes- Parker Hannifin part no.804-4
- Description
- Dry Air And Hot Water Hose, Low Pressure, Rubber
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
- Parker Hannifin part no.804-6
- Description
- Dry Air And Hot Water Hose, Low Pressure, Rubber
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
- Parker Hannifin part no.804-8
- Description
- Dry Air And Hot Water Hose, Low Pressure, Rubber
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
- Parker Hannifin part no.804-10
- Description
- Dry Air And Hot Water Hose, Low Pressure, Rubber
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
- Parker Hannifin part no.804-12
- Description
- Dry Air And Hot Water Hose, Low Pressure, Rubber
- Min burst (bar)
- 41
- Working pressure (bar)
- 10
Description — What this part number is, as the manufacturer lists it. Min burst — Minimum burst pressure. A test figure, never a working limit — never select on it.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Parker 804 Push-Lok hose used for?▾
Which sizes does the Parker 804 Push-Lok hose come in?▾
How do I identify Parker 804 Push-Lok part numbers such as 804-4?▾
What is the working pressure of the Parker 804 Push-Lok hose?▾
What is the Parker 804 Push-Lok hose made of?▾
What fluids is Parker 804 Push-Lok hose listed for?▾
What fittings go on Parker 804 Push-Lok hose?▾
Parker 804 Push-Lok or Parker Jiffy 7212 push-on hose?▾
How do you fit Parker Push-Lok hose?▾
Where is the Parker 804 Push-Lok hose made and can it be exported from Dubai?▾
Do you stock the Parker 804 Push-Lok hose in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Safety & HSE
Whip restraints and burst protection: what actually stops a failed hose hurting someone
A hose that lets go at a coupling becomes a moving object. Restraints, sleeves and guards each solve a different failure — and using the wrong one is the same as using none.
3 min read
Industrial hose
Compressed air hose selection: oil mist, temperature and the 40 bar exception
Most air hose on a site is rated 20 bar and looks the same. The differences that matter are the tube against compressor oil, the temperature off the discharge, and how the hose was built.
4 min read
Industrial hose
Universal air couplings explained: Chicago, claw and crowfoot, and the clip that holds them
The two-lug claw coupling on every compressor hose is called universal, Chicago and crowfoot, and it comes in American, European and Australian types. How they fit together, and what keeps one from letting go.
5 min read








