ORFS swivel female straight

ORFS swivel female straight — SS316 stainless-steel ORFS hose fitting, straight, female swivel. Passivated 316 for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: straight
- Thread Form: ORFS UN/UNF (9/16-18 to 1-7/16-12)
- Sealing Form: ORFS face O-ring
- Nominal Size Range: -04 to -16
- Fitting Configuration
- straight
- Thread Form
- ORFS UN/UNF (9/16-18 to 1-7/16-12)
- Sealing Form
- ORFS face O-ring
- Nominal Size Range
- -04 to -16
Product description
The ORFS swivel female straight is a SS316 stainless-steel hydraulic hose fitting in the straight configuration. Manufactured from 316 (austenitic, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: straight
- Thread form: ORFS UN/UNF (9/16-18 to 1-7/16-12)
- Sealing form: ORFS face O-ring
- Gender: female-swivel
- Material: 316 stainless steel (austenitic, marine grade)
- Surface treatment: Passivated 316 (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316 resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- SAE J1453
- ISO 8434-3
Fitting series in the size table
The part numbers listed are 43-series one-piece crimp fittings in 316 stainless steel, for 1- and 2-wire braided hose (SAE 100R1, 100R2, 100R16 and 100R17). Crimp them with the dies for that series.
How to order
Specify (a) the host hose grade and bore size and (b) the thread size. These are one-piece crimp fittings: the ferrule is part of the fitting, so no separate ferrule is needed. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with a hose grade the fitting series is made for (see above) for a correctly crimped assembly. Browse the SS316 Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | ORFS UN/UNF (9/16-18 to 1-7/16-12) |
| Sealing Form | ORFS face O-ring |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -16 |
Construction
| Parameter | Value |
|---|---|
| Material | 316 stainless steel (austenitic, marine grade) |
| Surface Treatment | Passivated 316 (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J1453, ISO 8434-3 |
Shipping & lead time
Sizes & part numbers
15 sizes- Indus part no.IH-SS-T43-FFX-04-04
- Hose bore
- -04 · 1/4"
- Thread
- 1/4" ORFS female swivel (9/16-18)
- Indus part no.IH-SS-T43-FFX-04-06
- Hose bore
- -04 · 1/4"
- Thread
- 3/8" ORFS female swivel (11/16-16)
- Indus part no.IH-SS-T43-FFX-06-06
- Hose bore
- -06 · 3/8"
- Thread
- 3/8" ORFS female swivel (11/16-16)
- Indus part no.IH-SS-T43-FFX-06-08
- Hose bore
- -06 · 3/8"
- Thread
- 1/2" ORFS female swivel (13/16-16)
- Indus part no.IH-SS-T43-FFX-08-08
- Hose bore
- -08 · 1/2"
- Thread
- 1/2" ORFS female swivel (13/16-16)
- Indus part no.IH-SS-T43-FFX-08-10
- Hose bore
- -08 · 1/2"
- Thread
- 5/8" ORFS female swivel (1-14)
- Indus part no.IH-SS-T43-FFX-08-12
- Hose bore
- -08 · 1/2"
- Thread
- 3/4" ORFS female swivel (1-3/16-12)
- Indus part no.IH-SS-T43-FFX-10-10
- Hose bore
- -10 · 5/8"
- Thread
- 5/8" ORFS female swivel (1-14)
Show all 15 sizesShow fewer sizes
- Indus part no.IH-SS-T43-FFX-12-12
- Hose bore
- -12 · 3/4"
- Thread
- 3/4" ORFS female swivel (1-3/16-12)
- Indus part no.IH-SS-T43-FFX-12-16
- Hose bore
- -12 · 3/4"
- Thread
- 1" ORFS female swivel (1-7/16-12)
- Indus part no.IH-SS-T43-FFX-16-12
- Hose bore
- -16 · 1"
- Thread
- 3/4" ORFS female swivel (1-3/16-12)
- Indus part no.IH-SS-T43-FFX-16-16
- Hose bore
- -16 · 1"
- Thread
- 1" ORFS female swivel (1-7/16-12)
- Indus part no.IH-SS-T43-FFX-16-20
- Hose bore
- -16 · 1"
- Thread
- 1-1/4" ORFS female swivel (1-11/16-12)
- Indus part no.IH-SS-T43-FFX-20-20
- Hose bore
- -20 · 1-1/4"
- Thread
- 1-1/4" ORFS female swivel (1-11/16-12)
- Indus part no.IH-SS-T43-FFX-24-24
- Hose bore
- -24 · 1-1/2"
- Thread
- 1-1/2" ORFS female swivel (2-12)
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the ORFS swivel female straight used for?▾
How do I read the part number IH-SS-T43-FFX-04-04 on the ORFS swivel female straight?▾
Which sizes does the ORFS swivel female straight come in?▾
How do I size the ORFS swivel female straight against the hose and the port?▾
What pressure rating does the ORFS swivel female straight have?▾
What is the ORFS swivel female straight made from, and where does stainless suit it?▾
Which standards does the ORFS swivel female straight follow?▾
What does the ORFS swivel female straight connect to?▾
How do I fit the ORFS swivel female straight so the O-ring face seal holds?▾
ORFS swivel female straight or ORFS male: how do I choose?▾
Where is the ORFS swivel female straight supplied from, and can it be exported from Dubai?▾
Is the ORFS swivel female straight in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- gerade ORFS Innengewinde mit O-Ring
- fr
- femelle ORFS avec joint torique
- es
- hembra ORFS con junta tórica
- it
- femmina ORFS con O-ring
From the blog
Written about this part
Failure analysis
Galvanic corrosion in fittings: what an upgrade moves rather than fixes
Put stainless into a plated steel port on a wet, salty site and the corrosion does not stop — it changes address. Sometimes that is the right trade.
3 min read
Buying fittings & adapters
316L stainless hydraulic fittings: what the range covers, and how it behaves differently
BSP, JIC, ORFS, metric, NPT and NPSM, SAE flanges, standpipes and banjos, all in passivated 316L. What each family covers, the pressure and bolting rules on the flanges, and the galling problem.
4 min read
Stainless steel fittings
316L stainless hose fittings: when a hose end has to be stainless, and the forms available
On a deck crane or a washdown line the hose often outlives its plated fittings — the ends rust first. 316L stainless hose fittings fix that, in every common end form: BSP 60° cone and flat seat, JIC 37°, ORFS, NPSM, metric 24°, SAE Code 61 and 62 flange heads, banjos, double-hex swivels and standpipes. When stainless is worth it, what changes with a stainless hose end, and how to specify one.
6 min read




