Parker PTFE Fluoropolymer Tubings, Metric

Parker PTFE Fluoropolymer Tubings, Metric in teflon: 4 part numbers.
Product description
Parker PTFE Fluoropolymer Tubings, Metric in teflon: 4 part numbers.
Specification
- Material: Teflon
- Working pressure stated by the maker at room temperature: 4 to 6 bar (about 60 to 85 psi), by size
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Parker part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the tubing
Select tubing on outside diameter for the push-in fittings it must fit, wall and material for pressure and temperature, and colour for circuit identification. Working pressure falls as temperature rises — check the maker rating at the operating temperature.
How to order
Quote the Parker part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| End 1 Type | NPT |
| End 2 Type | NPT |
| Series | PTFE Series |
| System Of Measurement | Metric |
Shipping & lead time
Sizes & part numbers
4 sizes- Parker Hannifin part no.201-1600100-NT-100
- I.D. (mm)
- 14
- Wall (mm)
- 1
- Description
- Parker 201 PTFE tube, 16 mm OD × 1 mm wall, natural, 100 ft
- Tube O.D. (mm)
- 16
- Working pressure (bar)
- 4
- Parker Hannifin part no.201-1400100-NT-100
- I.D. (mm)
- 12
- Wall (mm)
- 1
- Description
- Parker 201 PTFE tube, 14 mm OD × 1 mm wall, natural, 100 ft
- Tube O.D. (mm)
- 14
- Working pressure (bar)
- 5
- Parker Hannifin part no.201-1200100-NT-25
- I.D. (mm)
- 10
- Wall (mm)
- 1
- Description
- Parker 201 PTFE tube, 12 mm OD × 1 mm wall, natural, 25 ft
- Tube O.D. (mm)
- 12
- Working pressure (bar)
- 6
- Parker Hannifin part no.201-1200100-NT-100
- I.D. (mm)
- 10
- Wall (mm)
- 1
- Description
- Parker 201 PTFE tube, 12 mm OD × 1 mm wall, natural, 100 ft
- Tube O.D. (mm)
- 12
- Working pressure (bar)
- 6
I.D. (mm) — Inside diameter in millimetres with its tolerance, as published. Wall (mm) — Wall thickness in millimetres, as published — a single figure or a band. Description — What this part number is, as the manufacturer lists it. Tube O.D. — Outside diameter of the tube the port is cut for. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is on the Parker PTFE Fluoropolymer Tubings, Metric listing?▾
How do you read Parker PTFE metric part numbers such as 201-1400100-NT-100?▾
What sizes are available in Parker PTFE metric fluoropolymer tubing?▾
Which Parker metric PTFE size should I pick for a 12 mm fitting?▾
What is the working pressure of Parker metric PTFE tubing?▾
Which fluids suit Parker PTFE fluoropolymer metric tubing?▾
What documents come with Parker PTFE metric tubing?▾
Which fittings fit Parker 12 mm, 14 mm and 16 mm PTFE tubing?▾
How should Parker large-bore PTFE tubing be installed?▾
What is the difference between Parker PTFE metric and Parker 201 series PTFE listings?▾
What is the origin of Parker PTFE metric fluoropolymer tubing?▾
Is Parker PTFE metric tubing in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Pneumatics & compressed air
Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared
Nylon holds pressure, polyurethane bends, polyolefin stays clean and fluoropolymer takes heat and chemicals — and every one of them loses pressure rating as it warms. How the four families compare on SMC’s own data, how far ratings fall with temperature, minimum bend radius, why inch and metric tube are not interchangeable, and when to specify flame-resistant, antistatic or clean-room tubing.
12 min read
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read








