Molykote L-5030 Semi-Dry Lubricant

A liquid, semi-dry lubricant formulated without intentionally added PFAS, compatible with a wide range of plastics and elastomers. It rapidly forms a thin, semi-dry lubricating film on the substrate to facilitate assembly, reduce assembly force and improve component fit, minimize wear and fretting corrosion, and deliver reliable, long-lasting lubricity.

Features & benefits

• • Translucent to semi-translucent appearance after solvent evaporated

Applications

Suitable for a wide range of applications where a semi-dry lubricating film is required, including consumer electronic devices, electrical connector metal contacts, O‑rings, seals, and other plastic or elastomer‑based components.

Composition

• Technology: Silicone

Available pack sizes

• 0.6KG-10CTN

About this type of lubricant

A dispersion is solid lubricant — usually molybdenum disulfide, graphite or PTFE — suspended in a carrier oil or solvent so it can be brushed, sprayed, dipped or added to an oil system. The carrier delivers the solids to the surface and then evaporates or blends away, leaving the solid lubricant behind.

How to choose

Dispersions are used for running-in, for pre-treating surfaces before first operation, and as an additive to an existing oil charge to carry a machine through break-in or a period of marginal lubrication. Where a dispersion is added to a circulating system, confirm compatibility with the filtration first — solid lubricant particles and fine filters do not agree.

How to order

Specify the pack size and, where more than one grade shares a name, the exact grade on the RFQ. Indus Hydraulics is an authorised distributor and quotes MOLYKOTE® from Dubai stock where the grade is held; less common grades ship to order. Our engineers will confirm the grade against your application and operating conditions before you commit.

Product data on this page is published by DuPont, the manufacturer of MOLYKOTE®. See the linked technical data sheet for full test conditions.