Molykote G-N Metal Assembly Paste

Extreme-pressure lubricant for assembly, press fitting, threaded connections, running-in and maintenance

Features & benefits

• Excellent protection against fretting wear and corrosion

Applications

Primarily designed as a running-in Lubricant for plain bearings, splines, gears, cams and ways, and because of its low coefficient of friction, as a Lubricant for movable screws, threaded spindles and lead screws. It can also be used wherever protection against friction and high load conditions is needed or where burnishing is impractical. It is suitable for airframe and aircraft engine applications.

Composition

• Technology: Mineral Oil
• Solid lubricants: MoS2, white solids

Available pack sizes

• 500 g tub - 12 per carton
• 4.5 kg pail
• 22 kg pail

About this type of lubricant

A paste is a very high concentration of solid lubricant in a small amount of carrier oil — closer to a thick suspension than to a grease. It is used where a grease would be squeezed out: assembly and running-in of tight metal-to-metal fits, press fits, splines, threaded fasteners and anti-seize duty. The solids stay behind on the surface after the carrier is gone, which is the point.

How to choose

Pastes are for assembly and slow, heavily loaded contact, not for continuous high-speed lubrication — use a grease for that. For threaded joints, the coefficient of friction is the number that matters, because it is what a torque figure assumes; a paste that changes friction changes the clamping force the bolt actually achieves. Copper- and metal-filled pastes should not be used on stainless or on joints where galvanic corrosion is a risk.

How to order

Specify the pack size and, where more than one grade shares a name, the exact grade on the RFQ. Indus Hydraulics is an authorised distributor and quotes MOLYKOTE® from Dubai stock where the grade is held; less common grades ship to order. Our engineers will confirm the grade against your application and operating conditions before you commit.

Product data on this page is published by DuPont, the manufacturer of MOLYKOTE®. See the linked technical data sheet for full test conditions.