Molykote D-708 Anti-Friction Coating

A heat-cured anti-friction coating filled with solid lubricants in an organic binder.

Features & benefits

• Cured film has an operating temperature range of -60 to 240°C (-76 to 464°F)

Applications

Recommended for the lubrication/corrosion protection of metal/metal and metal/plastic pairings under low to medium loads. Applied coating is a solid film Lubricant designed to provide lubrication properties and corrosion protection plus a high quality surface finish. Automotive applications for this material include safety belt components, transmission parts, door locks, etc.

Composition

• Technology: Organic Binder, Solids, Solvent
• Solid lubricants: PTFE

Available pack sizes

• 18 liter pail
• 1KG-CAN

About this type of lubricant

An anti-friction coating is a bonded dry film: solid lubricant particles held in a resin binder, applied like a paint and then cured, air-dried or heat-cured. Once cured it is a permanent dry lubricating layer, typically 5-20 µm thick, that does not attract dust, does not migrate and does not need re-application.

How to choose

Choose a coating where oil or grease cannot be used or cannot be maintained: dusty and abrasive environments, clean assemblies, sealed-for-life mechanisms, plastic-on-metal contact, and points that are inaccessible after assembly. Surface preparation determines whether the coating lasts at all — the substrate must be clean and, for heat-cured grades, correctly pretreated. Check the cure temperature against what the component can survive before specifying; air-cured grades exist precisely for parts that cannot be baked.

How to order

Specify the pack size and, where more than one grade shares a name, the exact grade on the RFQ. Indus Hydraulics is an authorised distributor and quotes MOLYKOTE® from Dubai stock where the grade is held; less common grades ship to order. Our engineers will confirm the grade against your application and operating conditions before you commit.

Product data on this page is published by DuPont, the manufacturer of MOLYKOTE®. See the linked technical data sheet for full test conditions.