Male BSPT tapered

Male BSPT tapered — SS316L stainless-steel BSP hose fitting, straight, male. Passivated 316L for chemical, marine, and food-grade hydraulic service.
Key features
- Fitting Configuration: straight
- Thread Form: BSPT R1/8 to R2 (taper)
- Sealing Form: BSPT taper (self-sealing on engagement)
- Nominal Size Range: G1/8 to G2
- Fitting Configuration
- straight
- Thread Form
- BSPT R1/8 to R2 (taper)
- Sealing Form
- BSPT taper (self-sealing on engagement)
- Nominal Size Range
- G1/8 to G2
Product description
The Male BSPT tapered is a SS316L stainless-steel hydraulic hose fitting in the straight configuration. Manufactured from 316L (austenitic, low-carbon, marine-grade) stainless steel and passivated for native corrosion resistance — ideal for chemical, marine, food-grade, and pharmaceutical hydraulic service where carbon-steel fittings would corrode.
Construction
- Configuration: straight
- Thread form: BSPT R1/8 to R2 (taper)
- Sealing form: BSPT taper (self-sealing on engagement)
- Gender: male
- Material: 316L stainless steel (austenitic, low-carbon, marine grade)
- Surface treatment: Passivated 316L (no plating; native corrosion-resistant oxide layer)
Performance
Pressure rating tracks the host hose grade and ferrule when crimped to the correct diameter. Operating temperature -40°C to +200°C (limited by hose / O-ring material). 316L resists chloride pitting, marine atmosphere, dilute mineral acids, and food-grade cleaning chemistry.
Applicable Standards
- ISO 228-1 (BSPP)
- ISO 7-1 (BSPT)
How to order
Specify (a) the host hose grade and bore size, (b) the matching SS316L crimp ferrule (also available from Indus), and (c) the thread size on the SS316L body. Indus crimps and pressure-tests the assembly on request.
Companion products
Pair with Indus SS316L crimp ferrules and the matching SS316L hose grade for a fully stainless assembly. Browse the SS316L Fittings sub-section under Hoses & Fittings for matching thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | BSPT R1/8 to R2 (taper) |
| Sealing Form | BSPT taper (self-sealing on engagement) |
| Thread Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | G1/8 to G2 |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel (austenitic, low-carbon, marine grade) |
| Surface Treatment | Passivated 316L (no plating; native corrosion-resistant oxide layer) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 228-1 (BSPP), ISO 7-1 (BSPT) |
Shipping & lead time
What is the Male BSPT tapered used for?▾
Which sizes does the Male BSPT tapered come in?▾
Can a Male BSPT tapered fitting go into a BSPP port?▾
What pressure rating does the Male BSPT tapered have?▾
What is the Male BSPT tapered made from, and where does stainless suit it?▾
Which standards does the Male BSPT tapered follow?▾
What does the Male BSPT tapered connect to?▾
How should a stainless BSPT tapered thread be sealed?▾
Where is a stainless male BSPT thread used on hose assemblies?▾
Male BSPT tapered or BSP male-parallel 60° cone: how do they differ?▾
Where is the Male BSPT tapered supplied from, and can it be exported from Dubai?▾
Is the Male BSPT tapered in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Fittings by industry
Gold plant hydraulic fittings: where the chemistry decides the material
A gold circuit is abrasive in some places and chemically aggressive in others, and the two want different fittings. Getting that split right is most of the maintenance saving.
3 min read
Buying fittings & adapters
When stainless is worth it, and when it is a downgrade
Stainless fittings resist corrosion and often carry a lower pressure rating than the carbon-steel part they replace. Both facts matter, and only one of them is on the buyer’s mind.
3 min read
Buying fittings & adapters
316L stainless hydraulic fittings: what the range covers, and how it behaves differently
BSP, JIC, ORFS, metric, NPT and NPSM, SAE flanges, standpipes and banjos, all in passivated 316L. What each family covers, the pressure and bolting rules on the flanges, and the galling problem.
4 min read








