Low-Headroom Electric Wire Rope Hoist — 2/1 Reeving

Low-headroom electric wire rope hoist with 2/1 reeving: the hoist sits beside the beam to keep the hook high. Three frame sizes for I-beams from 28a to 63c, each for lifts of 6 to 30 m.
Key features
- Product type: Electric wire rope hoist, low-headroom
- Working load limit: Load rating on request
Product description
A low-headroom electric wire rope hoist with 2/1 reeving. It runs on a trolley with the hoist body beside the beam rather than hanging below it, which keeps the hook close to the beam and gains lift in buildings with little height above the runway.
The maker builds it in three frame sizes, for beam ranges of 28a to 40c, 32a to 45c and 40a to 63c — Chinese GB/T 706 I-beam sizes — and each for lifts of 6, 9, 12, 18, 24 and 30 m.
2/1 reeving
The hook hangs on two falls of wire rope: from the drum down round the sheave in the bottom block and back up to the frame. Each fall carries half the load and the hook rises at half the rope speed.
Load rating
No load rating is published for this range. The maker gives frame dimensions but no capacity. Tell us the load, lift, beam and duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
Choosing a hoist
Give the beam section and flange width, the capacity, lift, lifting and travel speeds and duty, and your supply voltage, phase and frequency. The beam range decides the frame size; check that the trolley suits your beam before ordering.
Inspection
In the UAE, lifting equipment must be thoroughly examined by an approved or accredited third party at least every 12 months, under Abu Dhabi's CoP 34.0 and Dubai Municipality's GU48 guideline.
Ordering
Send the capacity, lift, beam, supply and quantity you need, and we will confirm the specification and lead time on the quotation.
Identification
| Parameter | Value |
|---|---|
| Product type | Electric wire rope hoist, low-headroom |
| Sizes | 3 frame sizes |
Performance
| Parameter | Value |
|---|---|
| Working load limit | Load rating on request |
| Reeving | 2/1 (two falls) |
Dimensions
| Parameter | Value |
|---|---|
| Lifting heights | 6, 9, 12, 18, 24 or 30 m |
| Beam range | I-beams 28a–40c, 32a–45c or 40a–63c (GB/T 706), by frame size |
Construction
| Parameter | Value |
|---|---|
| Lifting medium | Steel wire rope |
Commercial
| Parameter | Value |
|---|---|
| Power supply | To order: state voltage, phase and frequency |
Shipping & lead time
What is Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving used for?▾
What sizes can Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving be supplied in?▾
How do I choose the right size of Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving?▾
What is the rated load of Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving?▾
What material and finish is Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving supplied in?▾
What standard and documents apply to Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving?▾
What does Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving connect to or work with?▾
How should Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving be inspected and looked after?▾
Where is Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving typically used?▾
How does Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving differ from Mini Electric Wire Rope Hoist — 220 V?▾
How are Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving shipped, and can they be exported from Dubai?▾
Do you keep Low-Headroom Electric Wire Rope Hoist, 2/1 Reeving in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog







