Electric Chain Hoist — Type A, 0.5–3 t WLL

Electric Chain Hoist, in 4 sizes, 0.5 t to 3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Electric Chain Hoist
- Size range: 0.5 t to 3 t
- Working load limit: 0.5 to 3 t
- Size range
- 0.5 t to 3 t
- Working load limit
- 0.5 to 3 t
Product description
Electric hoists for repetitive lifting.
Sizes and ratings
4 sizes, 0.5 t to 3 t. Working load limit 0.5 to 3 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Manufacturer's data
- Supplied with suspension hook, or with push, geared or electric trolley.
- Standard lift 3 m with a 2.5 m control cable; 36 V low-voltage control as standard.
- For 220–440 V, 50/60 Hz, single or three phase supplies.
- Top and bottom hooks with safety latches; drop-forged, heat-treated hooks designed to yield rather than fracture under overload.
- Limit switches at both ends of travel and a phase-error relay that stops the motor on an incorrect connection.
Choosing a size
Choose on capacity, lift, speed and duty, and state your supply voltage, phase and frequency on the RFQ.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Electric Chain Hoist |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 0.5 t to 3 t |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 0.5 to 3 t |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
4 sizes- Indus part no.IH-LR-EH-CA-0T5
- Size
- 0.5 t
- WLL (t)
- 0.5
- Proof load (kN)
- 6.3
- Standard lift (m)
- 3
- Lift speed (m/min)
- 5.8
- Load chain (mm)
- 7.1
- Falls
- 1
- Motor (kW)
- 0.8
- A (mm)
- 150
- B (mm)
- 112
- C (mm)
- 250
- D (mm)
- 245
- F (mm)
- 85
- J (mm)
- 17
- k (mm)
- 27
- L (mm)
- 550
- P (mm)
- 14
- Weight (kg)
- 44
- Indus part no.IH-LR-EH-CA-1T
- Size
- 1 t
- WLL (t)
- 1
- Proof load (kN)
- 12.5
- Standard lift (m)
- 3
- Lift speed (m/min)
- 4.3
- Load chain (mm)
- 7.1
- Falls
- 1
- Motor (kW)
- 1.1
- A (mm)
- 150
- B (mm)
- 112
- C (mm)
- 250
- D (mm)
- 245
- F (mm)
- 105
- J (mm)
- 26
- k (mm)
- 30
- L (mm)
- 590
- P (mm)
- 15
- Weight (kg)
- 46
- Indus part no.IH-LR-EH-CA-2T
- Size
- 2 t
- WLL (t)
- 2
- Proof load (kN)
- 25
- Standard lift (m)
- 3
- Lift speed (m/min)
- 2.15
- Load chain (mm)
- 7.1
- Falls
- 2
- Motor (kW)
- 1.1
- A (mm)
- 173
- B (mm)
- 90
- C (mm)
- 250
- D (mm)
- 245
- F (mm)
- 136
- J (mm)
- 36
- k (mm)
- 38
- L (mm)
- 770
- P (mm)
- 22
- Weight (kg)
- 60
- Indus part no.IH-LR-EH-CA-3T
- Size
- 3 t
- WLL (t)
- 3
- Proof load (kN)
- 37.5
- Standard lift (m)
- 3
- Lift speed (m/min)
- 1.43
- Load chain (mm)
- 7.1
- Falls
- 3
- Motor (kW)
- 1.1
- A (mm)
- 188
- B (mm)
- 77
- C (mm)
- 250
- D (mm)
- 245
- F (mm)
- 164
- J (mm)
- 45
- k (mm)
- 56
- L (mm)
- 775
- P (mm)
- 30
- Weight (kg)
- 68
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Standard lift — Lift supplied as standard; longer lifts to order. Lift speed — Lifting speed at rated load, as published. Load chain — Diameter of the load chain. Falls — Number of falls of load chain. Motor — Hoist motor power. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. F — Dimension F on the manufacturer dimension drawing. J — Dimension J on the manufacturer dimension drawing. k — Dimension k on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. P — Dimension P on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is Electric Chain Hoist, Type A used for?▾
How do I read an Indus part number for Electric Chain Hoist, Type A, such as IH-LR-EH-CA-0T5?▾
What sizes does Electric Chain Hoist, Type A come in?▾
How do I choose the right size of Electric Chain Hoist, Type A?▾
What is the rated load of Electric Chain Hoist, Type A?▾
What material and finish is Electric Chain Hoist, Type A supplied in?▾
What standard and certificate apply to Electric Chain Hoist, Type A?▾
What does Electric Chain Hoist, Type A connect to or work with?▾
How should Electric Chain Hoist, Type A be inspected and looked after?▾
How does Electric Chain Hoist, Type A differ from Electric Chain Hoist — Type B?▾
How are Electric Chain Hoist, Type A shipped, and can they be exported from Dubai?▾
Do you keep Electric Chain Hoist, Type A in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog







