JIC Male 74° Cone × SAE O-Ring Boss Run Tee
JIC Male 74° Cone × SAE O-Ring Boss Run Tee — JIC adapter, run tee body, 9 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: run tee
- Port A Thread: UN/UNF 7/16-20 to 1.7/8-12
- Port A Sealing: JIC 37° cone (74° included)
- Nominal Size Range: -04 to -24
- Body Configuration
- run tee
- Port A Thread
- UN/UNF 7/16-20 to 1.7/8-12
- Port A Sealing
- JIC 37° cone (74° included)
- Nominal Size Range
- -04 to -24
Product description
The JIC Male 74° Cone × SAE O-Ring Boss Run Tee is a run tee hydraulic adapter in the Indus JIC range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions and the part number to quote.
Construction
- Body configuration: run tee
- Port A: JIC Male 74° Cone
- Port B: SAE O-Ring Boss L-Series ISO 11926-3
- Material: carbon steel (stainless steel available on request)
- Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant
Threads
- Port A: UN/UNF 7/16-20 to 1.7/8-12
- Port B: UN/UNF 7/16-20 to 1.7/8-12
- Port C: UN/UNF 7/16-20 to 1.7/8-12
Sealing
JIC 37° cone (74° included) and SAE O-ring boss. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.
Performance
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
Applicable standards
SAE J514, ISO 8434-2, SAE J1926, ISO 11926.
How to order
Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.
Companion products
These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | run tee |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | UN/UNF 7/16-20 to 1.7/8-12 |
| Port A Sealing | JIC 37° cone (74° included) |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | UN/UNF 7/16-20 to 1.7/8-12 |
| Port B Sealing | SAE O-ring boss |
Port C
| Parameter | Value |
|---|---|
| Port C Thread | UN/UNF 7/16-20 to 1.7/8-12 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -24 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J514, ISO 8434-2, SAE J1926, ISO 11926 |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | End 1 | End 2 | End 3 | S1 (mm) | S2 (mm) | E (mm) | L1 (mm) | L2 (mm) | L3 (mm) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|
| IH-AD-JIC-051-04OG | 7/16"X20 | 7/16"X20 | 7/16"X20 | 11 | 17 | 31.5 | 22.6 | 22.6 | 26.2 | 43 |
| IH-AD-JIC-051-05OG | 1/2"X20 | 1/2"X20 | 1/2"X20 | 14 | 17 | — | 24.1 | 24.1 | 28.7 | 56 |
| IH-AD-JIC-051-06OG | 9/16"X18 | 9/16"X18 | 9/16"X18 | 14 | 19 | — | 26.9 | 26.9 | 31.8 | 74 |
| IH-AD-JIC-051-08OG | 3/4"X16 | 3/4"X16 | 3/4"X16 | 19 | 24 | 31 | 31.8 | 31.8 | 36.8 | 157 |
| IH-AD-JIC-051-10OG | 7/8"X14 | 7/8"X14 | 7/8"X14 | 22 | 27 | 24 | 36.8 | 36.8 | 43.2 | 226 |
| IH-AD-JIC-051-12OG | 1.1/16"X12 | 1.1/16"X12 | 1.1/16"X12 | 27 | 32 | — | 42.2 | 42.2 | 49.3 | 373 |
| IH-AD-JIC-051-16OG | 1.5/16"X12 | 1.5/16"X12 | 1.5/16"X12 | 33 | 41 | 20 | 46 | 46 | 52.1 | 569 |
| IH-AD-JIC-051-20OG | 1.5/8"X12 | 1.5/8"X12 | 1.5/8"X12 | 41 | 50 | — | 52.3 | 52.3 | 57.2 | 923 |
| IH-AD-JIC-051-24OG | 1.7/8"X12 | 1.7/8"X12 | 1.7/8"X12 | 48 | 55 | 16 | 59.2 | 59.2 | 60.7 | 1236 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What sizes does the JIC Male 74° Cone × SAE O-Ring Boss Run Tee come in?▾
Is it available in stainless steel?▾
Can I get it faster than the quoted lead time?▾
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- T-Stück JIC Außengewinde auf O-Ring Boss (ORB)
- fr
- té JIC mâle sur O-Ring Boss (ORB)
- es
- te JIC macho a O-Ring Boss (ORB)
- it
- raccordo a T JIC maschio a O-Ring Boss (ORB)
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
Engineers viewing this also looked at
Steel JIC 37° Male × NPTF Female Connector
Steel JIC 37° Male × NPTF Female 90° Elbow
Steel JIC 37° Male × NPTF Female 45° Elbow
Steel JIC 37° Male × NPTF Female Branch Tee
Steel JIC 37° Male × NPTF Male Run Tee
Steel JIC 37° Male × NPTF Female Run Tee
Steel JIC 37° Male × NPTF Male Service Tee
