High-Pressure Hydraulic Ball Valve, 1-1/2″ (DN40)
1-1/2″ (DN40) high-pressure hydraulic ball valve, rated 4,570 to 6,000 psi. Makes include Argus, Parker, Gemels, Pister and SVF.
Key features
- Valve Type: Ball valve — high-pressure hydraulic
- Nominal Size: 1-1/2 in (DN40)
- End Connection (Inlet): BSP (G 1-1/2), SAE flange (6,000 psi) and SAE flange
- Valve Type
- Ball valve — high-pressure hydraulic
- Nominal Size
- 1-1/2 in (DN40)
Product description
A 1-1/2″ (DN40) high-pressure ball valve for hydraulic circuits — pump, accumulator and return-line isolation where a process ball valve's rating runs out. The valves in this size are rated 4,570 to 6,000 psi, from Argus, Parker, Gemels, Pister, SVF, Anchor Fluid Power and Hydac. We supply them new, with the ends and seat to suit your system.
Makes and models in this size
| Make | Model / part no. | Body | Seat | Ends | Rating (as marked) |
|---|---|---|---|---|---|
| Argus | MK8 | Carbon steel | POM | — | PN315 (4,570 psi) |
| Parker | — | Steel | POM | BSP (G 1-1/2) | PN400 (5,800 psi) |
| Gemels | GB2 | — | — | BSP (G 1-1/2) | PN350 (5,075 psi) |
| Pister | FRKH DN40 | — | — | SAE flange (6,000 psi) | 6,000 psi |
| SVF | H7666MDBSE | 316L stainless (A479) | — | — | 6,000 psi |
| Anchor Fluid Power | AB2N | — | — | — | 5,075 psi |
| Hydac | — | — | — | SAE flange | 5,000 psi |
Each row is what is marked on, or listed for, a valve we have photographed in this size; a dash means it is not stated or not legible. Your valve is supplied to the specification on your RFQ.
Reading the rating
- PN is the pressure rating in bar at 20 °C: PN350 is 5,075 psi, PN400 is 5,800 psi.
- WOG is the cold working pressure for water, oil and gas; MAWP is the maximum allowable working pressure.
- SAE flange ends are rated by code: Code 61 flanges for 3,000 psi service and Code 62 for 6,000 psi.
- POM seats (acetal) are the usual choice in hydraulic oil; say if your fluid or temperature needs another.
Ordering
Give the size, pressure rating, end connection, body and seat material on your RFQ, with a make and part number if you have one. We confirm lead time and documentation on the quotation.
Identification
| Parameter | Value |
|---|---|
| Valve Type | Ball valve — high-pressure hydraulic |
| Makes | Argus, Parker, Gemels, Pister, SVF, Anchor Fluid Power, Hydac |
| Models / part numbers seen | MK8, GB2, FRKH DN40, H7666MDBSE, AB2N, 5200040866-002500 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size | 1-1/2 in (DN40) |
| End Connection (Inlet) | BSP (G 1-1/2), SAE flange (6,000 psi) and SAE flange |
Performance
| Parameter | Value |
|---|---|
| Pressure Class | PN315 (4,570 psi); PN400 (5,800 psi); PN350 (5,075 psi); 6,000 psi; 5,075 psi; 5,000 psi |
Construction
| Parameter | Value |
|---|---|
| Body Material | Carbon steel, Steel, 316L stainless (A479) |
| Seal / Elastomer Material | POM |
Shipping & lead time
What pressure ratings are available in a 1-1/2″ hydraulic ball valve?▾
What do PN, WOG and CWP mean?▾
Which end connections can you supply?▾
Can you supply a specific make or part number?▾
Are these valves supplied new?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
