Grade 80 Eye Shortening Grab Hook with Safety Pin — 2–5.3 t WLL

Grade 80 Eye Shortening Grab Hook with Safety Pin (EN 1677), in 3 sizes, 8 mm to 13 mm, WLL 2 to 5.3 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Eye Shortening Grab Hook with Safety Pin
- Pattern / standard: EN 1677
- Size range: 8 mm to 13 mm
- Working load limit: 2 to 5.3 t
- Size range
- 8 mm to 13 mm
- Working load limit
- 2 to 5.3 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Grade 80 alloy fittings for building and repairing Grade 80 chain slings. Made to EN 1677. Alloy steel, powder coated.
Sizes and ratings
3 sizes, 8 mm to 13 mm. Working load limit 2 to 5.3 t. Minimum breaking load 8 to 21.2 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and grade, and select on WLL. A sling is rated by its weakest component.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Eye Shortening Grab Hook with Safety Pin |
| Pattern / standard | EN 1677 |
| Sizes | 3 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 8 mm to 13 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 2 to 5.3 t |
| Minimum breaking load | 8 to 21.2 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
3 sizes- Indus part no.IH-LR-G8-ESGHSP-8MM
- Size
- 8 mm
- WLL (t)
- 2
- Min breaking load (t)
- 8
- B (mm)
- 50
- D (mm)
- 9.5
- E (mm)
- 11
- L (mm)
- 88.5
- M (mm)
- 17
- Weight (kg)
- 0.29
- Indus part no.IH-LR-G8-ESGHSP-10MM
- Size
- 10 mm
- WLL (t)
- 3.15
- Min breaking load (t)
- 12.6
- B (mm)
- 71
- D (mm)
- 13
- E (mm)
- 13
- L (mm)
- 121.5
- M (mm)
- 20
- Weight (kg)
- 0.75
- Indus part no.IH-LR-G8-ESGHSP-13MM
- Size
- 13 mm
- WLL (t)
- 5.3
- Min breaking load (t)
- 21.2
- B (mm)
- 96
- D (mm)
- 15.5
- E (mm)
- 16.5
- L (mm)
- 158
- M (mm)
- 26
- Weight (kg)
- 1.62
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. B — Dimension B on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. M — Dimension M on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 80 Eye Shortening Grab Hook with Safety Pin and what is it used for?▾
How are the Indus part numbers for the Grade 80 Eye Shortening Grab Hook with Safety Pin structured?▾
What sizes does the Grade 80 Eye Shortening Grab Hook with Safety Pin come in?▾
How do I choose the right size of Grade 80 Eye Shortening Grab Hook with Safety Pin?▾
What is the working load limit of the Grade 80 Eye Shortening Grab Hook with Safety Pin?▾
What is the Grade 80 Eye Shortening Grab Hook with Safety Pin made from?▾
Does the Grade 80 Eye Shortening Grab Hook with Safety Pin come with a test certificate?▾
What should the Grade 80 Eye Shortening Grab Hook with Safety Pin be used with?▾
How should the Grade 80 Eye Shortening Grab Hook with Safety Pin be inspected and used safely?▾
Where is the Grade 80 Eye Shortening Grab Hook with Safety Pin typically used?▾
How does the Grade 80 Eye Shortening Grab Hook with Safety Pin differ from the Grade 80 Shortening Grab Hook Clevis?▾
Do you stock the Grade 80 Eye Shortening Grab Hook with Safety Pin in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Lifting & rigging
Master links explained: single links, assemblies with sub-links, and sizing to the hook
The master link is the top of a multi-leg sling: it gathers the legs and sits in the crane hook. Two legs can share a single master link; three or four need an assembly with sub-links. And the link has to fit the hook as well as the chain. Here is how to choose one.
5 min read
Lifting & rigging
Hammerlocks, clevis fittings and connecting links: joining chain sling components
Every chain sling joins chain to a master link and a hook somewhere. A hammerlock-type connecting link does it with two halves and a pin; a clevis fitting takes the chain straight onto its pin; an eye fitting needs a link to join it. What each joint is, how they are rated, and the look-alike links that must never be used for lifting.
6 min read
Lifting & rigging
Lifting hook types: eye, clevis and swivel hooks, sling vs grab hooks, and latches
Hooks are chosen on two things: how they attach (eye, clevis, shank or swivel) and what they do (a sling or slip hook holds a load in its bowl; a grab hook grips a chain link). Use a grab hook to shorten a chain and the sling loses 20% unless the hook is a cradle type. Here is how the types differ, and when a hook comes out of service.
6 min read








