Grade 80 Clevis Shortening Clutch — 1.12–15 t WLL, EN 1677

Grade 80 Clevis Shortening Clutch (EN 1677), in 7 sizes, 6 mm to 22 mm, WLL 1.12 to 15 t. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: Grade 80 Clevis Shortening Clutch
- Pattern / standard: EN 1677
- Size range: 6 mm to 22 mm
- Working load limit: 1.12 to 15 t
- Size range
- 6 mm to 22 mm
- Working load limit
- 1.12 to 15 t
- Material
- Alloy steel
- Finish
- Powder coated
Product description
Grade 80 alloy fittings for building and repairing Grade 80 chain slings. Made to EN 1677. Alloy steel, powder coated.
Sizes and ratings
7 sizes, 6 mm to 22 mm. Working load limit 1.12 to 15 t. Minimum breaking load 4.48 to 60 t. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Drop forged / quenched and tempered.
- Rated with a 4:1 design factor between working load limit and minimum breaking load.
Choosing a size
Match the fitting to the chain size and grade, and select on WLL. A sling is rated by its weakest component.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | Grade 80 Clevis Shortening Clutch |
| Pattern / standard | EN 1677 |
| Sizes | 7 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 22 mm |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.12 to 15 t |
| Minimum breaking load | 4.48 to 60 t |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel |
| Finish | Powder coated |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-LR-G8-CSC-6MM
- Size
- 6 mm
- WLL (t)
- 1.12
- Min breaking load (t)
- 4.48
- A (mm)
- 8
- B (mm)
- 44
- C (mm)
- 7.5
- D (mm)
- 30
- E (mm)
- 32.8
- H (mm)
- 11.8
- L (mm)
- 73.5
- P (mm)
- 7.5
- S (mm)
- 12
- Ø (mm)
- 7.8
- Weight (kg)
- 0.18
- Indus part no.IH-LR-G8-CSC-8MM
- Size
- 8 mm
- WLL (t)
- 2
- Min breaking load (t)
- 8
- A (mm)
- 10.5
- B (mm)
- 61.7
- C (mm)
- 9.5
- D (mm)
- 36
- E (mm)
- 45
- H (mm)
- 15.7
- L (mm)
- 101
- P (mm)
- 9.5
- S (mm)
- 17
- Ø (mm)
- 9.2
- Weight (kg)
- 0.45
- Indus part no.IH-LR-G8-CSC-10MM
- Size
- 10 mm
- WLL (t)
- 3.15
- Min breaking load (t)
- 12.6
- A (mm)
- 12.4
- B (mm)
- 92
- C (mm)
- 13
- D (mm)
- 48
- E (mm)
- 55
- H (mm)
- 20
- L (mm)
- 138
- P (mm)
- 13
- S (mm)
- 28
- Ø (mm)
- 13.2
- Weight (kg)
- 0.93
- Indus part no.IH-LR-G8-CSC-13MM
- Size
- 13 mm
- WLL (t)
- 5.3
- Min breaking load (t)
- 21.2
- A (mm)
- 16
- B (mm)
- 115
- C (mm)
- 16.5
- D (mm)
- 59
- E (mm)
- 75
- H (mm)
- 24.5
- L (mm)
- 177
- P (mm)
- 16.5
- S (mm)
- 34.5
- Ø (mm)
- 16.2
- Weight (kg)
- 1.88
- Indus part no.IH-LR-G8-CSC-16MM
- Size
- 16 mm
- WLL (t)
- 8
- Min breaking load (t)
- 32
- A (mm)
- 19.5
- B (mm)
- 143
- C (mm)
- 21
- D (mm)
- 73
- E (mm)
- 93
- H (mm)
- 30.5
- L (mm)
- 220
- P (mm)
- 21
- S (mm)
- 40
- Ø (mm)
- 20
- Weight (kg)
- 3.5
- Indus part no.IH-LR-G8-CSC-20MM
- Size
- 20 mm
- WLL (t)
- 12.5
- Min breaking load (t)
- 50
- A (mm)
- 23
- B (mm)
- 152
- C (mm)
- 23.5
- D (mm)
- 81
- E (mm)
- 102
- H (mm)
- 36
- L (mm)
- 238
- P (mm)
- 23.5
- S (mm)
- 46
- Ø (mm)
- 24.3
- Weight (kg)
- 4.43
- Indus part no.IH-LR-G8-CSC-22MM
- Size
- 22 mm
- WLL (t)
- 15
- Min breaking load (t)
- 60
- A (mm)
- 26
- B (mm)
- 195
- C (mm)
- 25.5
- D (mm)
- 98
- E (mm)
- 118
- H (mm)
- 42
- L (mm)
- 295
- P (mm)
- 25.5
- S (mm)
- 57.5
- Ø (mm)
- 28.1
- Weight (kg)
- 8.05
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Min breaking load — Minimum breaking load. A test figure — never lift to it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. D — Dimension D on the manufacturer dimension drawing. E — Dimension E on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. P — Dimension P on the manufacturer dimension drawing. S — Dimension S on the manufacturer dimension drawing. Ø — Dimension Ø on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Grade 80 Clevis Shortening Clutch and what is it used for?▾
How are the Indus part numbers for the Grade 80 Clevis Shortening Clutch structured?▾
What sizes does the Grade 80 Clevis Shortening Clutch come in?▾
How do I choose the right size of Grade 80 Clevis Shortening Clutch?▾
What is the working load limit of the Grade 80 Clevis Shortening Clutch?▾
What is the Grade 80 Clevis Shortening Clutch made from?▾
Does the Grade 80 Clevis Shortening Clutch come with a test certificate?▾
What should the Grade 80 Clevis Shortening Clutch be used with?▾
How should the Grade 80 Clevis Shortening Clutch be inspected and used safely?▾
Where is the Grade 80 Clevis Shortening Clutch typically used?▾
How does the Grade 80 Clevis Shortening Clutch differ from the Grade 80 Clevis C Hook?▾
Do you stock the Grade 80 Clevis Shortening Clutch in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Lifting & rigging
Shortening a chain sling: clutches, cradle grab hooks and the 20% rule
Uneven loads and off-centre lifting points need legs of different lengths, and a chain sling with shorteners adjusts on the spot. But not every grab hook carries the full chain rating when it shortens a leg. Shortening clutches, cradle and conventional grab hooks, when a maker requires a 20% reduction, and what must never be used instead.
3 min read
Lifting & rigging
Precast panel and beam rigging: slings, clutches and multi-leg rules above the anchor
A precast element is lifted on anchors cast into it, but the anchors are only half the system. The clutches, chain slings, master link and spreader above them decide whether the load is shared as designed. How to rig precast panels and beams, why a four-leg sling rarely shares a rigid load evenly, and what regulators’ codes say about anchors, clutches and rigging diagrams.
4 min read








