Grade 100 Single-Leg Chain Sling, Master Link and Sling Hook — Type SOS

Grade 100 single-leg chain sling with an oblong master link at the top and a sling hook with safety latch at the bottom (type SOS). 11 chain sizes, 6 to 26 mm, WLL 1.4 to 26.5 t. Made to your reach, with Indus part numbers and the manufacturer's test certificate.
Key features
- Product type: Single-leg chain sling
- Pattern / standard: Grade 100 chain sling, rated on the EN 818-4 method
- Size range: 6 mm to 26 mm chain
- Working load limit: 1.4 to 26.5 t
- Size range
- 6 mm to 26 mm chain
- Working load limit
- 1.4 to 26.5 t
- Material
- Grade 100 alloy steel chain and fittings, quenched and tempered
Product description
Grade 100 single-leg chain sling made up with an oblong master link at the top and a sling hook with safety latch at the bottom. The chain and every fitting are Grade 100 alloy steel, quenched and tempered, and matched in size so that no component is the weak point.
What SOS means
Chain sling make-ups are named by a letter code read from the top down: S = single leg; O = oblong master link; S = sling hook with safety latch. So an SOS sling is a single leg sling with an oblong master link at the top and a sling hook with safety latch at the bottom.
Sizes and ratings
11 chain sizes, 6 mm to 26 mm. Working load limit 1.4 to 26.5 t in a straight vertical lift, at a 4:1 design factor. Used in a choke hitch the rating falls to 80% of the figure in the table. Each size has its own Indus part number below.
Grade 100 against Grade 80
Grade 100 chain carries about 25% more than Grade 80 chain of the same diameter, so a given load can often be lifted on a sling one chain size smaller and lighter. The table gives the standard Grade 100 ratings, worked on the same method as EN 818-4. Chain above 26 mm is made to order and its rating is confirmed on the quotation.
Choosing this make-up
The oblong master link sits on the crane hook and lets the sling hang and turn freely. A sling hook is the general-purpose end fitting: the spring latch closes the throat so the hook cannot slip off a slack lifting point.
Identification and certificate
Each sling carries a permanent tag with its serial number, chain size, grade, reach and working load limit, and ships with the manufacturer's test certificate. The rating on the tag and certificate is the one that governs the sling in service.
Ordering
Slings are made up to length. Quote the Indus part number for the chain size and the reach you need, measured from the bearing point of the master link to the bearing point of the hook, or send the load, the number of lifting points and the headroom and we will size the sling for you.
Identification
| Parameter | Value |
|---|---|
| Product type | Single-leg chain sling |
| Pattern / standard | Grade 100 chain sling, rated on the EN 818-4 method |
| Sizes | 11 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 6 mm to 26 mm chain |
| Reach | Made to order |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 1.4 to 26.5 t |
| Design factor | 4:1 |
Construction
| Parameter | Value |
|---|---|
| Material | Grade 100 alloy steel chain and fittings, quenched and tempered |
| Legs | 1 |
| Top fitting | Oblong master link |
| Bottom fitting | Sling hook with safety latch |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate; serial-numbered identification tag |
Shipping & lead time
Sizes & part numbers
11 sizes| Indus part no. | Size | WLL (t) |
|---|---|---|
| IH-LR-CS-G100SOS-6MM | 6 mm | 1.4 |
| IH-LR-CS-G100SOS-7MM | 7 mm | 1.9 |
| IH-LR-CS-G100SOS-8MM | 8 mm | 2.5 |
| IH-LR-CS-G100SOS-10MM | 10 mm | 4 |
| IH-LR-CS-G100SOS-13MM | 13 mm | 6.7 |
| IH-LR-CS-G100SOS-16MM | 16 mm | 10 |
| IH-LR-CS-G100SOS-18MM | 18 mm | 12.5 |
| IH-LR-CS-G100SOS-19MM | 19 mm | 14 |
| IH-LR-CS-G100SOS-20MM | 20 mm | 16 |
| IH-LR-CS-G100SOS-22MM | 22 mm | 19 |
| IH-LR-CS-G100SOS-26MM | 26 mm | 26.5 |
Size — Nominal size as the manufacturer states it. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What does SOS mean on a chain sling?▾
What is the working load limit of this Grade 100 single-leg chain sling?▾
Can Grade 80 and Grade 100 parts be mixed in one sling?▾
How often must a chain sling be examined in the UAE?▾
Does the sling come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this part
Engineers viewing this also looked at
Grade 100 Single-Leg Chain Sling, Master Link and Self-Locking Hook — Type SOSL

Grade 100 Single-Leg Chain Sling, Sling Hook and Grab Hook — Type SSG

Grade 100 Single-Leg Chain Sling, Self-Locking Hook and Grab Hook — Type SSLG
Grade 100 Single-Leg Chain Sling, Self-Locking Hook Both Ends — Type SSLSL

Grade 100 Single-Leg Chain Sling, Sling Hook Both Ends — Type SSS

Grade 100 Three-Leg Chain Sling with Foundry Hooks — Type TOF

Grade 100 Three-Leg Chain Sling with Grab Hooks — Type TOG

