Gates Non Conductive C14 PTFE Hydraulic Hoses

Gates Non Conductive C14 PTFE Hydraulic Hoses, 3/16" to 0.406": 3 part numbers.
Product description
Gates Non Conductive C14 PTFE Hydraulic Hoses, 3/16" to 0.406": 3 part numbers.
Specification
- Type: Hydraulic Hose
- Size range: 3/16" to 0.406"
- Pressure stated by the maker: 1,000 to 1,500 psi (69 to 103 bar), by size
- Temperature: -65°F to +400°F
- Reinforcement Construction: One Braid, Stainless Steel
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Gates part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Gates part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Cover Type | Stainless Steel Wire 304, Silver, Standard |
| Recommended For | Air Compressor Discharge, Hot Oil And Fluids, Hot And Greasy Environments. |
| Tube Type | PTFE, Type A, White, Non Conductive, Smooth Bore |
Shipping & lead time
Sizes & part numbers
3 sizes- Gates part no.77520800
- Description
- Hydraulic Hose, 0.406 Inch I.D, 0.55 Inch O.D, 1000 PSI, Silver
- Hose bore
- -06 · 0.406"
- Min burst (bar)
- 69
- Min bend radius (mm)
- 134.6
- Working pressure (bar)
- 69
- Gates part no.77520525
- Description
- Hydraulic Hose, 0.25 Inch I.D, 0.38 Inch O.D, 1500 PSI, Silver
- Hose bore
- -04 · 1/4"
- Min burst (bar)
- 103
- Min bend radius (mm)
- 76.2
- Working pressure (bar)
- 103
- Gates part no.77520425
- Description
- Hydraulic Hose, 0.1875 Inch I.D, 0.31 Inch O.D, 1500 PSI, Silver
- Hose bore
- -03 · 3/16"
- Min burst (bar)
- 103
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 103
Description — What this part number is, as the manufacturer lists it. Min burst — Minimum burst pressure. A test figure, never a working limit — never select on it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What are the Gates Non Conductive C14 PTFE Hydraulic Hoses and what are they used for?▾
How do I identify the Gates C14 PTFE hose part numbers 77520425, 77520525 and 77520800?▾
What sizes and part numbers do the Gates Non Conductive C14 PTFE Hydraulic Hoses cover?▾
How do I choose between the three Gates C14 PTFE hose sizes?▾
What pressure and temperature do the Gates Non Conductive C14 PTFE Hydraulic Hoses have?▾
What are the Gates Non Conductive C14 PTFE Hydraulic Hoses made from?▾
What standards apply to the Gates C14 PTFE hose?▾
What fittings and couplings suit the Gates Non Conductive C14 PTFE Hydraulic Hoses?▾
How do I install the Gates C14 PTFE hose?▾
How does the Gates C14 PTFE hose differ from the Aeroquip PTFE hose assemblies?▾
Where is the Gates C14 PTFE hose recommended?▾
Do you stock the Gates Non Conductive C14 PTFE Hydraulic Hoses in Dubai for export?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog







