Convoluted PTFE Hose with Polypropylene Braid

The Convoluted PTFE Hose with Polypropylene Braid is a convoluted-ptfe metallic hose in the PTFE Convoluted family. PTFE core with single braid of Polypropylene. Working pressure to 16 bar, operating temperature -73°C to +260°C.

Construction

• Type: PTFE Convoluted — Anti-static convoluted PTFE with polymer braid
• Construction: Convoluted-PTFE
• Core material: PTFE
• Braid: Single Braid — Polypropylene
• End fitting material: Carbon steel or 316SS — sanitary tri-clamp, NPT, JIC, or flanged per order
• Nominal ID range: DN 10 (3/8") to DN 50 (2")
• Bend radius (static): 40 mm minimum
• Bend radius (dynamic): 130 mm minimum

Performance

Maximum working pressure 16 bar at the smallest bore (decreases with increasing diameter — refer to the OEM size table for per-size ratings). Minimum burst pressure 64 bar with safety factor 4:1 per ISO 10380. Operating temperature range -73°C to +260°C (continuous service; intermittent excursions evaluated on request). All assemblies hydrotested at 1.5× working pressure with a witness-test certificate available on request.

Applications

• Chemical transfer (corrosive, anti-static required)
• Pharmaceutical transfer
• Food and beverage (FDA-compliant trim)
• High-purity solvent transfer

Compliance

• ISO 10380:2012 N/A (Corrugated Metal Hoses and Hose Assemblies)
• Pressure Equipment Directive 2014/68/EU Module A
• EN 10204 3.1 / 3.2 mill test reports on request

How to order

Confirm (a) line working pressure and process medium, (b) operating temperature range, (c) bore size and overall length, (d) end fitting type per side (NPT / BSPP / ANSI 150-1500# RF / DIN PN10-PN40 / sanitary tri-clamp / camlock / butt-weld / etc.), (e) braid configuration (unbraided / single / double / triple — drives pressure rating), (f) any required certifications (ISO 10380 PSL class, PED Module, ASME conformance, NACE MR0175, CGA / UL / Chlorine Institute). Indus quotes ex-Dubai for stock items and ex-OEM for build-to-order, with mill test reports and pressure-test certificates included.

Companion products

Pair with matched ANSI flange gaskets, hose clamps, and OEM end-fitting hardware. For high-vibration installations, also specify a Lock-Section or Armor-Flex external hose guard. For fire-rated runs, add a Fry-Sil Fire Jacket or Fire Tape covering. For high-cycle or premium-corrosion service, ask about the matched OEM expansion-joint variant of the same alloy and pressure class.