Skip to content

Forged Side Entry Floating Ball Valve, Soft Seated

Floating Ball ValvesEx-stock · delivery in 3 days
Forged steel two-piece floating ball valve with lever operator and raised-face flanged ends
VIEW 01·Forged steel two-piece floating ball valve with lever operator and raised-face flanged ends

Forged side-entry floating ball valves, ISO 17292 to Class 800 and ASME B16.34 to Class 2500: two-piece and three-piece split body, NPS 1/2" to 6", soft seats, fire-safe to API 607 / API 6FA.

Key features

  • Valve type: Floating ball valve, soft seated, forged
  • Construction: Two-piece or three-piece forged split body, side entry
  • Design standard: ISO 17292, ASME B16.34
  • Size range: NPS 1/2" to 6" (DN15 to DN150)
  • Pressure class: ASME Class 150 to 2500
  • Body material: Forged carbon steel, stainless steel, alloy steel, duplex
  • End connections: RF, RTJ flanged; butt-weld, socket weld, NPT
  • Operation: Lever, gear operator, pneumatic, electric or hydraulic actuator
Valve type
Floating ball valve, soft seated, forged
Design standard
ISO 17292, ASME B16.34
Pressure class
ASME Class 150 to 2500
End connections
RF, RTJ flanged; butt-weld, socket weld, NPT
Operation
Lever, gear operator, pneumatic, electric or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Forged two- and three-piece floating ball valves for the higher classes, where they are an economical alternative to small trunnion mounted valves. The forged body takes Class 1500 and 2500 in the small sizes.

In a floating ball valve the ball is held between two seats and line pressure pushes it onto the downstream seat to seal. A quarter turn opens or closes it, and the straight bore gives a low pressure drop when open.

Construction

  • Two-piece or three-piece forged split body
  • Soft seats (PTFE, RPTFE, PEEK, Devlon)
  • Blow-out proof stem, anti-static device, fire-safe design
  • Flanged, butt-weld, socket-weld or threaded ends

Sizes and ratings

Published range: NPS 1/2" to 6" (DN15 to DN150), ASME Class 150 to 2500, in forged carbon steel, stainless steel, alloy steel, duplex. End connections: RF, RTJ flanged; butt-weld, socket weld, NPT. Operation: lever, gear operator, pneumatic, electric or hydraulic actuator.

The size table below lists 24 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire. Figures are as published; confirm critical dimensions against the general arrangement drawing issued with the order.

Testing and documents

Hydrostatic shell and seat tests to API 6D, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Forged floating ball valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other floating ball valves in the range, for comparison when the duty is not settled yet: Floating Double Block and Bleed Compact Ball Valve, Jacketed Ball Valve, Full Jacket, Three-Way Ball Valve, L and T Port, Cast Floating Ball Valve, Soft Seated, ISO 17292.

Identification

ParameterValue
Valve typeFloating ball valve, soft seated, forged
ConstructionTwo-piece or three-piece forged split body, side entry

Standards

ParameterValue
Design standardISO 17292, ASME B16.34
Fire-safe designAPI 607 / API 6FA
Pressure testingHydrostatic shell and seat tests to API 6D

Range

ParameterValue
Size rangeNPS 1/2" to 6" (DN15 to DN150)
Pressure classASME Class 150 to 2500
Temperature range-46 °C to 200 °C

Materials

ParameterValue
Body materialForged carbon steel, stainless steel, alloy steel, duplex
Seat and trimPTFE, RPTFE, PEEK or Devlon seats

Construction

ParameterValue
End connectionsRF, RTJ flanged; butt-weld, socket weld, NPT
OperationLever, gear operator, pneumatic, electric or hydraulic actuator

Application

ParameterValue
Typical serviceHigh-pressure process and utility lines

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at