Skip to content

Cast Floating Ball Valve, Soft Seated, ISO 17292

Floating Ball ValvesEx-stock · delivery in 3 days
Cast steel floating ball valve with gear operator, handwheel and raised-face flanged ends
VIEW 01·Cast steel floating ball valve with gear operator, handwheel and raised-face flanged ends

Cast end-entry and side-entry floating ball valves to ISO 17292 and API 6D: NPS 1/2" to 10", Class 150 and 300, soft seats, fire-safe to API 607, anti-static, blow-out proof stem.

Key features

  • Valve type: Floating ball valve, soft seated
  • Construction: Cast end-entry (uni-body) or two-piece split body
  • Design standard: ISO 17292, API 6D, ASME B16.34
  • Size range: NPS 1/2" to 10" (DN15 to DN250)
  • Pressure class: ASME Class 150 and 300
  • Body material: Carbon steel, stainless steel, alloy steel, duplex
  • End connections: RF, FF, RTJ flanged; butt-weld
  • Operation: Lever, gear operator, pneumatic, electric or hydraulic actuator
Valve type
Floating ball valve, soft seated
Design standard
ISO 17292, API 6D, ASME B16.34
Pressure class
ASME Class 150 and 300
End connections
RF, FF, RTJ flanged; butt-weld
Operation
Lever, gear operator, pneumatic, electric or hydraulic actuator
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

The general-purpose quarter-turn valve for process, utility and tank lines in Class 150 and 300. A cast body, end-entry (one-piece) or split two-piece, carries a floating ball between soft seats that give bubble-tight shut-off.

In a floating ball valve the ball is held between two seats and line pressure pushes it onto the downstream seat to seal. A quarter turn opens or closes it, and the straight bore gives a low pressure drop when open.

Construction

  • Uni-body end-entry or two-piece split body, cast
  • RPTFE, PTFE or reinforced soft seats
  • Blow-out proof stem, anti-static device, fire-safe design
  • Lever, gear operator or ISO 5211 actuator mounting

Sizes and ratings

Published range: NPS 1/2" to 10" (DN15 to DN250), ASME Class 150 and 300, in carbon steel, stainless steel, alloy steel, duplex. End connections: RF, FF, RTJ flanged; butt-weld. Operation: lever, gear operator, pneumatic, electric or hydraulic actuator.

The size table below lists 22 standard size and class combinations with face-to-face or end-to-end length, height and weight, so the valve can be checked against the piping layout before you enquire. Figures are as published; confirm critical dimensions against the general arrangement drawing issued with the order.

Testing and documents

Hydrostatic shell and seat tests to API 6D, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Floating ball valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other floating ball valves in the range, for comparison when the duty is not settled yet: Metal Seated Floating Ball Valve, Forged Side Entry Floating Ball Valve, Soft Seated, Floating Double Block and Bleed Compact Ball Valve, Jacketed Ball Valve, Full Jacket.

Identification

ParameterValue
Valve typeFloating ball valve, soft seated
ConstructionCast end-entry (uni-body) or two-piece split body

Standards

ParameterValue
Design standardISO 17292, API 6D, ASME B16.34
Fire-safe designAPI 607 / API 6FA
Fugitive emissionsLow-emission packing to ISO 15848 on request
Pressure testingHydrostatic shell and seat tests to API 6D

Range

ParameterValue
Size rangeNPS 1/2" to 10" (DN15 to DN250)
Pressure classASME Class 150 and 300
Temperature range-46 °C to 200 °C

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex
Seat and trimRPTFE, PTFE or reinforced soft seats

Construction

ParameterValue
End connectionsRF, FF, RTJ flanged; butt-weld
OperationLever, gear operator, pneumatic, electric or hydraulic actuator

Application

ParameterValue
Typical serviceProcess, utility, tank and chemical lines

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the pressure-test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at