Figure 200 Hammer Union — Butt Weld Ends, 2,000 psi

Figure 200 hammer union, standard service, butt weld ends in Sch 40 and Sch 80. 2" to 8", rated 2,000 psi (138 bar). Full size table with weights and dimensions on this page.
Key features
- Figure Number: 200
- Union Type: Union
- End Connection: Butt weld
- Service Class: Standard service
- Working Pressure: 2000 psi
- Nominal Size Range: 2" to 8"
- Seal Arrangement: Metal-to-metal ball and cone seat
- Figure Number
- 200
- Union Type
- Union
- End Connection
- Butt weld
- Service Class
- Standard service
- Working Pressure
- 2000 psi
- Nominal Size Range
- 2" to 8"
Product description
The Figure 200 is a compact, economical all-steel union covering a wide range of service up to and including 2,000 psi.
Applications
Line connections and manifolds in the 2,000 psi class.
Construction and sealing
- All-steel construction.
- Available with threaded and butt weld ends.
- Metal-to-metal ball and cone seat.
- Sealing: Metal-to-metal ball and cone seat.
- Material: All steel.
Working pressure
2,000 psi (138 bar) cold working pressure, tested at 3,000 psi.
How a hammer union makes up
A hammer union is a three-piece connection. A male sub and a female sub carry the two line ends, and a wing nut turns on a thread cut into the male sub and pulls a shoulder on the female sub down onto the seat. The lugs standing proud of the nut are struck with a hammer to tighten it, which is where the name comes from — the joint is made up and broken out with a sledgehammer rather than a wrench, so a line can be rigged and stripped quickly in the field. The seal is made by the seat, not by the thread: the nut only supplies the load that holds the two seating faces together. That is why a union will leak from a scored seat or a perished seal long before the thread is at fault, and why a worn union is usually a sub or a seal replacement rather than a scrap part.
Specifying one
Four things fix a hammer union: the figure number, which sets the pressure class and decides what it will mate with; the service class, standard or sour gas; the end connection, threaded or butt weld; and the nominal size. Figure numbers are an industry series, so a union of the same figure and size from another maker will mate — but the pressure rating stamped on the union is what governs, not the figure number on its own. Send us the line specification and we will confirm the match before quoting.
Sizes and part numbers
Published in 2" to 8" with butt weld ends in Sch 40 and Sch 80. Every orderable size, its weight, its dimensions and its working pressure are in the size table on this page. Where dimensions and weight are critical, ask us to confirm them against the build before you order.
Identification
| Parameter | Value |
|---|---|
| Figure Number | 200 |
| Union Type | Union |
| End Connection | Butt weld |
| Weld Schedule | Sch 40, Sch 80 |
Performance
| Parameter | Value |
|---|---|
| Service Class | Standard service |
| Working Pressure | 2000 psi |
| Working Pressure | 138 bar |
| Test Pressure | 3000 psi |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 2" to 8" |
Sealing
| Parameter | Value |
|---|---|
| Seal Arrangement | Metal-to-metal ball and cone seat |
Construction
| Parameter | Value |
|---|---|
| Body Material | All steel |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-HU-200-BW40-STD-0200
- Nominal size
- 2"
- End connection
- 2" butt weld, Sch 40
- A (mm)
- 73.1
- B (mm)
- 80
- Weight (g)
- 2500
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW40-STD-0300
- Nominal size
- 3"
- End connection
- 3" butt weld, Sch 40
- A (mm)
- 98.5
- B (mm)
- 101.6
- Weight (g)
- 5700
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW40-STD-0400
- Nominal size
- 4"
- End connection
- 4" butt weld, Sch 40
- A (mm)
- 114.3
- B (mm)
- 122.4
- Weight (g)
- 6700
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW40-STD-0500
- Nominal size
- 5"
- End connection
- 5" butt weld, Sch 40
- A (mm)
- 146
- B (mm)
- 152.4
- Weight (g)
- 14800
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW40-STD-0600
- Nominal size
- 6"
- End connection
- 6" butt weld, Sch 40
- A (mm)
- 165.1
- B (mm)
- 147.8
- Weight (g)
- 21700
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW40-STD-0800
- Nominal size
- 8"
- End connection
- 8" butt weld, Sch 40
- A (mm)
- 184.1
- B (mm)
- 175.5
- Weight (g)
- 31100
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW80-STD-0200
- Nominal size
- 2"
- End connection
- 2" butt weld, Sch 80
- A (mm)
- 73.1
- B (mm)
- 82.5
- Weight (g)
- 2600
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW80-STD-0300
- Nominal size
- 3"
- End connection
- 3" butt weld, Sch 80
- A (mm)
- 98.5
- B (mm)
- 105.1
- Weight (g)
- 5600
- Working pressure (bar)
- 138
Show all 12 sizesShow fewer sizes
- Indus part no.IH-HU-200-BW80-STD-0400
- Nominal size
- 4"
- End connection
- 4" butt weld, Sch 80
- A (mm)
- 114.3
- B (mm)
- 126.4
- Weight (g)
- 7300
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW80-STD-0500
- Nominal size
- 5"
- End connection
- 5" butt weld, Sch 80
- A (mm)
- 146
- B (mm)
- 156.7
- Weight (g)
- 17000
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW80-STD-0600
- Nominal size
- 6"
- End connection
- 6" butt weld, Sch 80
- A (mm)
- 165.1
- B (mm)
- 153.9
- Weight (g)
- 23300
- Working pressure (bar)
- 138
- Indus part no.IH-HU-200-BW80-STD-0800
- Nominal size
- 8"
- End connection
- 8" butt weld, Sch 80
- A (mm)
- 184.1
- B (mm)
- 182.6
- Weight (g)
- 33900
- Working pressure (bar)
- 138
A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is a Figure 200 butt weld hammer union used for?▾
What does IH-HU-200-BW80-STD-0400 mean on a Figure 200 union?▾
What pressure is a Figure 200 butt weld hammer union rated for?▾
What sizes and weld schedules are available for the Figure 200 butt weld union?▾
Should I order Sch 40 or Sch 80 weld ends on a Figure 200 hammer union?▾
What material and seal does the Figure 200 butt weld union use?▾
Can a Figure 200 hammer union be used on sour gas lines?▾
Does the Figure 200 butt weld union mate with Figure 206 and Figure 207?▾
How should a Figure 200 butt weld union be welded and made up?▾
Figure 200 vs Figure 206 hammer union: what is the difference?▾
What test pressure and records apply to a Figure 200 butt weld union?▾
Are Figure 200 butt weld hammer unions available ex-stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Verschraubung
- fr
- union à marteau union
- es
- unión de martillo unión
- it
- giunto a martello giunto
From the blog








