Figure 211 Insulated Hammer Union — 2,000 psi

Figure 211 hammer union, standard service, threaded ends. 2" to 3", rated 2,000 psi (138 bar). Working pressure stated per size on this page.
Key features
- Figure Number: 211
- Union Type: Insulated union
- End Connection: Threaded (line pipe)
- Service Class: Standard service
- Working Pressure: 2000 psi
- Nominal Size Range: 2" to 3"
- Seal Arrangement: Dual abrasion-resistant precision elastomers
- Figure Number
- 211
- Union Type
- Insulated union
- End Connection
- Threaded (line pipe)
- Service Class
- Standard service
- Working Pressure
- 2000 psi
- Nominal Size Range
- 2" to 3"
Product description
The Figure 211 is an insulated union for systems where static or electrolytic corrosion is a problem.
Applications
Lines where static or electrolytic corrosion has to be broken.
Construction and sealing
- Insulated design that removes metal-to-metal contact across the union.
- Two abrasion-resistant precision elastomers carry the seal.
- Sealing: Dual abrasion-resistant precision elastomers.
Working pressure
2,000 psi (138 bar) cold working pressure, tested at 3,000 psi.
How a hammer union makes up
A hammer union is a three-piece connection. A male sub and a female sub carry the two line ends, and a wing nut turns on a thread cut into the male sub and pulls a shoulder on the female sub down onto the seat. The lugs standing proud of the nut are struck with a hammer to tighten it, which is where the name comes from — the joint is made up and broken out with a sledgehammer rather than a wrench, so a line can be rigged and stripped quickly in the field. The seal is made by the seat, not by the thread: the nut only supplies the load that holds the two seating faces together. That is why a union will leak from a scored seat or a perished seal long before the thread is at fault, and why a worn union is usually a sub or a seal replacement rather than a scrap part.
Specifying one
Four things fix a hammer union: the figure number, which sets the pressure class and decides what it will mate with; the service class, standard or sour gas; the end connection, threaded or butt weld; and the nominal size. Figure numbers are an industry series, so a union of the same figure and size from another maker will mate — but the pressure rating stamped on the union is what governs, not the figure number on its own. Send us the line specification and we will confirm the match before quoting.
Sizes and part numbers
Published in 2" to 3" with threaded ends. The size table on this page states the working pressure for every size. Our source publishes no dimension table for this figure, so none is shown — ask us for a dimensioned drawing and we will get it from the mill rather than infer it.
Identification
| Parameter | Value |
|---|---|
| Figure Number | 211 |
| Union Type | Insulated union |
| End Connection | Threaded (line pipe) |
Performance
| Parameter | Value |
|---|---|
| Service Class | Standard service |
| Working Pressure | 2000 psi |
| Working Pressure | 138 bar |
| Test Pressure | 3000 psi |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 2" to 3" |
Sealing
| Parameter | Value |
|---|---|
| Seal Arrangement | Dual abrasion-resistant precision elastomers |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-HU-211-THD-STD-0200
- Nominal size
- 2"
- End connection
- 2" LP thread
- Working pressure (bar)
- 138
- Indus part no.IH-HU-211-THD-STD-0300
- Nominal size
- 3"
- End connection
- 3" LP thread
- Working pressure (bar)
- 138
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is a Figure 211 insulated hammer union used for?▾
What does the Figure 211 part number IH-HU-211-THD-STD-0300 mean?▾
What is the working pressure of a Figure 211 insulated union?▾
What sizes does the Figure 211 insulated hammer union come in?▾
Where should a Figure 211 insulated union be placed in a line?▾
How does the Figure 211 insulated union seal?▾
Is the Figure 211 insulated union rated for sour gas service?▾
Which unions mate with a Figure 211 insulated hammer union?▾
How do you check that a Figure 211 union is still insulating?▾
Figure 211 vs Figure 200: when do I need the insulated union?▾
What documents should I ask for with a Figure 211 union?▾
Do you have Figure 211 insulated unions in stock?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Hammerverschraubung Verschraubung
- fr
- union à marteau union
- es
- unión de martillo unión
- it
- giunto a martello giunto
From the blog








