Dixon Male Flat Face Unions

Dixon Male Flat Face Unions in steel: 6 part numbers.
Product description
Dixon Male Flat Face Unions in steel: 6 part numbers.
Specification
- Type: Union
- Material: Steel
- Pressure stated by the maker: 6,000 psi (414 bar)
- Thread Type: Flat Face
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Dixon part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Thread Type | Flat Face |
Shipping & lead time
Sizes & part numbers
6 sizes- Dixon Valve & Coupling part no.FS2403-6
- Description
- Male Flat Face Union, Flat Face Thread, 11/16 Inch-16 Thread, Zinc Plated Steel
- Thread
- 11/16"-16 Flat Face (male)
- Working pressure (bar)
- 414
- Dixon Valve & Coupling part no.FS2403-10
- Description
- Male Flat Face Union, Flat Face Thread, 1 Inch-14 Thread, Zinc Plated Steel
- Thread
- 1"-14 Flat Face (male)
- Working pressure (bar)
- 414
- Dixon Valve & Coupling part no.FS2403-12
- Description
- Male Flat Face Union, Flat Face Thread, 1-3/16 Inch-12 Thread
- Thread
- 1 3/16"-12 Flat Face (male)
- Working pressure (bar)
- 414
- Dixon Valve & Coupling part no.FS2403-16
- Description
- Male Flat Face Union, Flat Face Thread, 1-7/16 Inch-12 Thread
- Thread
- 1 7/16"-12 Flat Face (male)
- Working pressure (bar)
- 414
- Dixon Valve & Coupling part no.FS2403-4
- Description
- Male Flat Face Union, Flat Face Thread, 9/16 Inch-18 Thread, Zinc Plated Steel
- Thread
- 9/16"-18 Flat Face (male)
- Working pressure (bar)
- 414
- Dixon Valve & Coupling part no.FS2403-8
- Description
- Male Flat Face Union, Flat Face Thread, 13/16 Inch-16 Thread, Zinc Plated Steel
- Thread
- 13/16"-16 Flat Face (male)
- Working pressure (bar)
- 414
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What are the Dixon Male Flat Face Unions used for?▾
What is the part number for 11/16"-16 Flat Face (male) in the Dixon Male Flat Face Unions?▾
Which sizes of the Dixon Male Flat Face Unions are available?▾
How do I choose the right Dixon Male Flat Face Unions for my port threads?▾
What is the working pressure of the Dixon Male Flat Face Unions?▾
What are the Dixon Male Flat Face Unions made from, and is it suitable for my fluid?▾
Which standards do the Dixon Male Flat Face Unions conform to, and can I get test certificates?▾
What mates with the Dixon Male Flat Face Unions, and which fittings do I pair them with?▾
How do the Dixon Male Flat Face Unions seal, and what should I check when fitting them?▾
How do the Dixon Male Flat Face Unions differ from the Dixon Unions?▾
Where are the Dixon Male Flat Face Unions made, and can you export them from Dubai?▾
Do you stock the Dixon Male Flat Face Unions in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Buying fittings & adapters
NPT and NPSM hydraulic adapters: NPTF Dryseal, the 30° swivel seat, ratings — and weld-on adapters
NPT is the one hydraulic thread that seals on the thread, and Parker lists its limits plainly: poor dynamic sealing, ports that can crack, limited remakeability. Yet every pump, filter and gauge on an American machine has one. The steel NPT and NPSM range — nipples, elbows, tees, swivels, plugs and caps — with ratings by size (male and female differ), why an NPSM swivel needs a 30° seat, and the weld-on adapters that put a port on plate.
6 min read
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read








