Petersen 142-9 Series Test Cap

Petersen 142-9 Series Test Cap: 6 part numbers.
Product description
Petersen 142-9 Series Test Cap: 6 part numbers.
Specification
- Type: Test Cap
- Pressure stated by the maker: 13 psi (1 bar)
- Seal Material: PVC
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Petersen part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Petersen part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Seal Material | PVC |
Shipping & lead time
Sizes & part numbers
6 sizes- Petersen part no.142-9402
- Description
- Test Cap, Hose Clamp Style, 2 Inch Pipe Size
- Working pressure (bar)
- 1
- Petersen part no.142-9403
- Description
- Test Cap, Hose Clamp Style, 3 Inch Pipe Size
- Working pressure (bar)
- 1
- Petersen part no.142-9404
- Description
- Test Cap, Hose Clamp Style, 4 Inch Pipe Size
- Working pressure (bar)
- 1
- Petersen part no.142-9405
- Description
- Test Cap, Hose Clamp Style, 5 Inch Pipe Size
- Working pressure (bar)
- 1
- Petersen part no.142-9406
- Description
- Test Cap, Hose Clamp Style, 6 Inch Pipe Size
- Working pressure (bar)
- 1
- Petersen part no.142-94015
- Description
- Test Cap, Hose Clamp Style, 1.5 Inch Pipe Size
- Working pressure (bar)
- 1
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What is the Petersen 142-9 Series Test Cap used for?▾
What is the part number for Test Cap, Hose Clamp Style, 2 Inch Pipe Size in the Petersen 142-9 Series Test Cap?▾
Which sizes of the Petersen 142-9 Series Test Cap are available?▾
How do I choose the right Petersen 142-9 Series Test Cap for my port threads?▾
What is the working pressure of the Petersen 142-9 Series Test Cap?▾
What is the Petersen 142-9 Series Test Cap made from, and is it suitable for my fluid?▾
Which standards does the Petersen 142-9 Series Test Cap conform to, and can I get test certificates?▾
What mates with the Petersen 142-9 Series Test Cap, and which fittings do I pair it with?▾
How does the Petersen 142-9 Series Test Cap seal, and what should I check when fitting it?▾
How does the Petersen 142-9 Series Test Cap differ from the Aeroquip 2090 Series Tee/Y Adapters?▾
Where is the Petersen 142-9 Series Test Cap made, and can you export it from Dubai?▾
Do you stock the Petersen 142-9 Series Test Cap in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Verschlusskappe
- fr
- bouchon femelle
- es
- tapón hembra
- it
- cappuccio
From the blog
Written about this range
Buying fittings & adapters
NPT and NPSM hydraulic adapters: NPTF Dryseal, the 30° swivel seat, ratings — and weld-on adapters
NPT is the one hydraulic thread that seals on the thread, and Parker lists its limits plainly: poor dynamic sealing, ports that can crack, limited remakeability. Yet every pump, filter and gauge on an American machine has one. The steel NPT and NPSM range — nipples, elbows, tees, swivels, plugs and caps — with ratings by size (male and female differ), why an NPSM swivel needs a 30° seat, and the weld-on adapters that put a port on plate.
6 min read
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read








