Bow Chain Stopper — OCIMF Tongue Type

Bow Chain Stopper. Indus part number.
Key features
- Product type: Bow Chain Stopper
- Pattern / standard: OCIMF
- Size range: 76–78 mm chain
- Working load limit: 350 t
Product description
OCIMF tongue-type bow chain stopper for tanker mooring.
Configuration
Supplied as one configuration: 76–78 mm chain. Its Indus part number is in the table below.
Safe working loads are as the maker publishes them. A working load is not a breaking load; never load a fitting past its WLL.
Dimensions are typical and can vary slightly between production runs; the drawing sent with the quotation is final.
Specifying
State the standard, nominal size and SWL, and whether the fitting is welded or bolted to the deck.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Bow Chain Stopper |
| Pattern / standard | OCIMF |
| Sizes | 1 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 76–78 mm chain |
Performance
| Parameter | Value |
|---|---|
| Working load limit | 350 t |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-MR-DF-BCS-0760
- Size
- 76–78 mm chain
- Chain size
- 76–78 mm
- WLL (t)
- 350
- A (mm)
- 123
- B (mm)
- 360
- H (mm)
- 875
- L (mm)
- 1,510
- W (mm)
- 696
Size — Nominal size as the manufacturer states it. Chain size — Chain the fitting is made for. WLL — Working load limit — the most the part may carry in service, as the manufacturer rates it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. W — Dimension W on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What is the Bow Chain Stopper — OCIMF Tongue Type and where is it used?▾
How do I read Bow Chain Stopper — OCIMF Tongue Type part numbers such as IH-MR-DF-BCS-0760?▾
What size range does the Bow Chain Stopper — OCIMF Tongue Type cover?▾
How should I pick the size of Bow Chain Stopper — OCIMF Tongue Type for my job?▾
What load rating does the Bow Chain Stopper — OCIMF Tongue Type carry?▾
What material and finish does the Bow Chain Stopper — OCIMF Tongue Type have?▾
Does the Bow Chain Stopper — OCIMF Tongue Type come with a test certificate?▾
What do I use with the Bow Chain Stopper — OCIMF Tongue Type?▾
How do I install and check the Bow Chain Stopper — OCIMF Tongue Type?▾
How does the Bow Chain Stopper — OCIMF Tongue Type compare with the Chain Stopper — JIS F 2031?▾
Can you export the Bow Chain Stopper — OCIMF Tongue Type from Dubai?▾
Is the Bow Chain Stopper — OCIMF Tongue Type available from stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Anchor chain & mooring
Chain locker volume: how much space anchor chain needs, with a formula and table
A chain locker must hold the whole cable with room for it to pile and run free. The formula classification practice uses, the volume per 100 m and per shot for every chain size from 12.5 to 162 mm, a worked example, and the rules for the locker itself.
4 min read
Anchor chain & mooring
Arrangement of an anchor chain cable: lengths, links, Kenter shackles and the swivel forerunner
An anchor cable is not one chain but a string of 27.5 m lengths, joined by Kenter or D-type shackles, with a swivel forerunner at the anchor end and an end fastening in the chain locker. What each part is, how the common, enlarged and end links differ, and how the pieces are combined.
6 min read








