Dinamic Oil T Series Hydraulic Towing and Recovery Winches — 2,700 to 30,000 daN

Dinamic Oil T series hydraulic towing and recovery winches: 7 sizes, 2,700 to 30,000 daN first-layer pull, 10 to 26 mm cable, drum freewheel and multi-disc brake. Built in Italy. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.
Key features
- Product type: Hydraulic towing / recovery winch
- Series: Dinamic Oil T
- Execution: Modular: motor, brake and planetary gearbox on the drum
- Line pull, 1st layer: 2,700 to 30,000 daN (1st layer)
- Rope diameter: 10 to 26 mm
- Motor / input: Orbit hydraulic motor with overcentre valve
- Brake: Negative static multi-disc
- Product type
- Hydraulic towing / recovery winch
- Series
- Dinamic Oil T
- Execution
- Modular: motor, brake and planetary gearbox on the drum
Product description
Dinamic Oil's T series are hydraulic pulling winches for tow trucks, recovery vehicles, lorries, agricultural and forestry machines and any job that needs a horizontal pull. Seven sizes give first-layer line pulls from 2,700 daN (T27 IN) to 30,000 daN (T300) on 10 to 26 mm cable. The design keeps the hydraulic motor, the static brake and the planetary gearbox as separate modules on the drum, which makes installation and maintenance simpler.
Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.
Construction
- Orbit hydraulic motor with a pilot-operated overcentre valve mounted on it, which stops the load running back.
- Negative static multi-disc brake, closed by disc springs and released by the motor pressure.
- Drum freewheel — manual, pneumatic or hydraulic — so the cable can be pulled out by hand to the vehicle.
- Cast iron or steel drum on high-capacity bearings, planetary gearbox in an oil bath, cast or fabricated frame.
Options
Cable tensioner (B), fairlead cable guide (C2) or both (C1); four rotation and cable-exit arrangements (counterclockwise or clockwise, cable over or under the drum). Dinamic Oil recommends 6x36 Warrington Seale IWRC cable to ISO 2408, 2,160 N/mm², in 10 to 26 mm.
Use
The table gives the first-layer pull, cable speed, cable, motor, flow, pulling pressure, ratio, brake torque and weight; the datasheet gives four layers in SI and imperial units. Keep at least five wraps of cable on the drum and the return-line back pressure under 5 bar. These are pulling winches: they must not be used to lift or carry people.
Sizing
Choose the winch on the pull it must deliver on the layer it will work from — the first layer gives the highest pull and the lowest speed. A snatch block on the casualty roughly doubles the available pull at half the cable speed, less the sheave's losses. Check that the truck's hydraulic pump delivers the winch's oil flow at its pulling pressure.
Identification
| Parameter | Value |
|---|---|
| Product type | Hydraulic towing / recovery winch |
| Series | Dinamic Oil T |
| Execution | Modular: motor, brake and planetary gearbox on the drum |
Performance
| Parameter | Value |
|---|---|
| Line pull, 1st layer | 2,700 to 30,000 daN (1st layer) |
| Rope diameter | 10 to 26 mm |
| Rope speed, 1st layer | 4.5 to 12 m/min (1st layer) |
Hydraulics
| Parameter | Value |
|---|---|
| Oil flow | 45 to 100 L/min |
| Working pressure | 140 to 210 bar (pulling) |
Construction
| Parameter | Value |
|---|---|
| Motor / input | Orbit hydraulic motor with overcentre valve |
| Brake | Negative static multi-disc |
| Output / mounting | Drum with manual, pneumatic or hydraulic freewheel |
| Lubrication | Gear oil bath |
Supply
| Parameter | Value |
|---|---|
| Made in | Italy (Dinamic Oil S.p.A., Bomporto) |
| Supply | Authorised distributor, direct from the factory |
Shipping & lead time
Sizes & part numbers
7 sizes- Indus part no.IH-DO-T-27IN
- Description
- T27 IN
- Max flow (L/min)
- 50
- Displacement (cm³/rev)
- 160
- Line pull, 1st layer (daN)
- 2,700
- Rope speed, 1st layer (m/min)
- 12
- Rope dia. (mm)
- 10
- Rope capacity (m)
- 35
- Brake torque (Nm)
- 550
- Weight (kg)
- 50
- Ratio
- 1:5.77
- Working pressure (bar)
- 140
- Indus part no.IH-DO-T-36IN
- Description
- T36 IN
- Max flow (L/min)
- 50
- Displacement (cm³/rev)
- 200
- Line pull, 1st layer (daN)
- 3,600
- Rope speed, 1st layer (m/min)
- 10
- Rope dia. (mm)
- 12
- Rope capacity (m)
- 30.5
- Brake torque (Nm)
- 550
- Weight (kg)
- 50
- Ratio
- 1:5.77
- Working pressure (bar)
- 150
- Indus part no.IH-DO-T-46IN
- Description
- T46 IN
- Max flow (L/min)
- 50
- Displacement (cm³/rev)
- 250
- Line pull, 1st layer (daN)
- 4,600
- Rope speed, 1st layer (m/min)
- 8.5
- Rope dia. (mm)
- 12
- Rope capacity (m)
- 30.5
- Brake torque (Nm)
- 550
- Weight (kg)
- 50
- Ratio
- 1:5.43
- Working pressure (bar)
- 165
- Indus part no.IH-DO-T-60
- Description
- T60
- Max flow (L/min)
- 45
- Displacement (cm³/rev)
- 127
- Line pull, 1st layer (daN)
- 6,000
- Rope speed, 1st layer (m/min)
- 6.5
- Rope dia. (mm)
- 14
- Rope capacity (m)
- 40
- Brake torque (Nm)
- 550
- Weight (kg)
- 86
- Ratio
- 1:14.8
- Working pressure (bar)
- 180
- Indus part no.IH-DO-T-100
- Description
- T100
- Max flow (L/min)
- 75
- Displacement (cm³/rev)
- 160
- Line pull, 1st layer (daN)
- 10,000
- Rope speed, 1st layer (m/min)
- 8
- Rope dia. (mm)
- 16
- Rope capacity (m)
- 43
- Brake torque (Nm)
- 420
- Weight (kg)
- 135
- Ratio
- 1:23
- Working pressure (bar)
- 170
- Indus part no.IH-DO-T-200
- Description
- T200
- Max flow (L/min)
- 75
- Displacement (cm³/rev)
- 125
- Line pull, 1st layer (daN)
- 20,000
- Rope speed, 1st layer (m/min)
- 5
- Rope dia. (mm)
- 22
- Rope capacity (m)
- 51
- Brake torque (Nm)
- 420
- Weight (kg)
- 250
- Ratio
- 1:64.5
- Working pressure (bar)
- 210
- Indus part no.IH-DO-T-300
- Description
- T300
- Max flow (L/min)
- 100
- Displacement (cm³/rev)
- 250
- Line pull, 1st layer (daN)
- 30,000
- Rope speed, 1st layer (m/min)
- 4.5
- Rope dia. (mm)
- 26
- Rope capacity (m)
- 65.5
- Brake torque (Nm)
- 1200
- Weight (kg)
- 420
- Ratio
- 1:60.5
- Working pressure (bar)
- 205
Description — What this part number is, as the manufacturer lists it. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Displacement — Displacement per revolution, as published. Line pull, 1st layer — Rope pull on the first drum layer, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Rope speed, 1st layer — Rope speed on the first drum layer at the stated oil flow, as published. Rope dia. — Wire rope diameter the drum is grooved or sized for, as published. Rope capacity — Rope the drum holds on its last layer, as published. Brake torque — Static torque of the negative (spring-applied) brake, as published. Weight — Weight as the manufacturer publishes it. Ratio — Reduction ratio, or the range of ratios the model is built in, as published.
What is the Dinamic Oil T Series Hydraulic Towing and Recovery Winches used for?▾
How do I read a model such as T27 IN or T300?▾
Which sizes and line pulls do the Dinamic Oil T Series Hydraulic Towing and Recovery Winches cover?▾
How do I size a T Series Hydraulic Towing and Recovery Winches recovery winch?▾
What pressure and flow do the Dinamic Oil T Series Hydraulic Towing and Recovery Winches need?▾
What is the drum freewheel on the Dinamic Oil T Series Hydraulic Towing and Recovery Winches for?▾
Can a T series winch be used for lifting?▾
Which cable should I use with the Dinamic Oil T Series Hydraulic Towing and Recovery Winches?▾
How are the Dinamic Oil T Series Hydraulic Towing and Recovery Winches built and can they run in Gulf summer temperatures?▾
How do the T series winches compare with a winch drive such as the WD?▾
Are the Dinamic Oil T Series Hydraulic Towing and Recovery Winches genuine Dinamic Oil units and can you export them?▾
Do you keep the Dinamic Oil T Series Hydraulic Towing and Recovery Winches in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
