Dinamic Oil GR Wheel Drives with Integrated Orbital Motor — 470 to 1,600 Nm

Dinamic Oil GR 80 and GR 200 wheel drives: planetary hub with built-in orbital motor, 16 motor variants, 470–1,600 Nm continuous, up to 2,500 Nm peak. Built in Italy. From Indus Hydraulics, authorised Dinamic Oil distributor, UAE.
Key features
- Product type: Wheel drive with integrated motor
- Series: Dinamic Oil GR
- Execution: Single-ratio planetary hub with orbital motor
- Output torque: 470 to 1,600 Nm continuous; up to 2,500 Nm peak
- Reduction ratio: 5.23 (GR 80), 6.2 (GR 200)
- Motor / input: Integrated orbital hydraulic motor, displacement by variant
- Brake: Not published; mechanical release on request
- Product type
- Wheel drive with integrated motor
- Series
- Dinamic Oil GR
- Execution
- Single-ratio planetary hub with orbital motor
Product description
GR wheel drives combine a single-ratio planetary gearbox with an orbital hydraulic motor in one compact hub: the wheel bolts to the output flange and the unit bolts to the chassis. Two sizes — GR 80 (ratio 5.23) and GR 200 (ratio 6.2) — each come with a choice of motor displacement, giving continuous output torques of 470 to 1,600 Nm and peak torques up to 2,500 Nm. They are built for light self-propelled machines such as scissor and boom lifts, small loaders, AGVs and vineyard straddle robots.
Indus Hydraulics is an authorised Dinamic Oil distributor and supplies direct from Dinamic Oil's factory in Bomporto, Italy.
Range
The table lists each motor variant with its total displacement (motor displacement times the gearbox ratio), continuous and peak output torque, maximum output speed and oil flow. The motor's pressure drop for each torque rating and the flange and port dimensions are in Dinamic Oil's wheel and track drive catalogue.
Options
A mechanical release can be fitted so the vehicle can be towed with the drive disengaged.
Selection
Size the drive on the tractive effort at the wheel: rolling resistance plus gradient times the machine weight on that wheel, times the wheel's rolling radius, gives the torque. Check it against the continuous rating for normal travel and the peak rating for starting on a slope, and the wheel speed against the maximum output speed.
Lubrication and service
Dinamic Oil gearboxes run in an oil bath of EP gear oil, ISO VG 220 to 320; fill before start-up and recheck the level after a few minutes' running. Change the oil after the first 150 operating hours, then at the interval in the use and maintenance manual or at least every two years. Synthetic oil is recommended for very high ambient temperatures. The manual is attached to this page.
Identification
| Parameter | Value |
|---|---|
| Product type | Wheel drive with integrated motor |
| Series | Dinamic Oil GR |
| Execution | Single-ratio planetary hub with orbital motor |
Performance
| Parameter | Value |
|---|---|
| Output torque | 470 to 1,600 Nm continuous; up to 2,500 Nm peak |
| Reduction ratio | 5.23 (GR 80), 6.2 (GR 200) |
Hydraulics
| Parameter | Value |
|---|---|
| Oil flow | 30 L/min |
Construction
| Parameter | Value |
|---|---|
| Motor / input | Integrated orbital hydraulic motor, displacement by variant |
| Brake | Not published; mechanical release on request |
| Output / mounting | Wheel flange |
| Lubrication | Oil bath |
Supply
| Parameter | Value |
|---|---|
| Made in | Italy (Dinamic Oil S.p.A., Bomporto) |
| Supply | Authorised distributor, direct from the factory |
Shipping & lead time
Sizes & part numbers
16 sizes- Indus part no.IH-DO-GR-80MR50
- Description
- GR80-MR50
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 269.9
- Max speed (rpm)
- 115
- Output torque (Nm)
- 470
- Peak torque (Nm)
- 630
- Ratio
- 5.23
- Indus part no.IH-DO-GR-80MR80
- Description
- GR80-MR80
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 420
- Max speed (rpm)
- 68
- Output torque (Nm)
- 800
- Peak torque (Nm)
- 1,060
- Ratio
- 5.23
- Indus part no.IH-DO-GR-80MR100
- Description
- GR80-MR100
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 522
- Max speed (rpm)
- 55
- Output torque (Nm)
- 800
- Peak torque (Nm)
- 1,310
- Ratio
- 5.23
- Indus part no.IH-DO-GR-80MR125
- Description
- GR80-MR125
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 657.4
- Max speed (rpm)
- 45
- Output torque (Nm)
- 800
- Peak torque (Nm)
- 1,500
- Ratio
- 5.23
- Indus part no.IH-DO-GR-80MR160
- Description
- GR80-MR160
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 834.7
- Max speed (rpm)
- 33
- Output torque (Nm)
- 800
- Peak torque (Nm)
- 1,500
- Ratio
- 5.23
- Indus part no.IH-DO-GR-80MR200
- Description
- GR80-MR200
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 1045
- Max speed (rpm)
- 26
- Output torque (Nm)
- 800
- Peak torque (Nm)
- 1,500
- Ratio
- 5.23
- Indus part no.IH-DO-GR-80MR250
- Description
- GR80-MR250
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 1303.8
- Max speed (rpm)
- 21
- Output torque (Nm)
- 800
- Peak torque (Nm)
- 1,500
- Ratio
- 5.23
- Indus part no.IH-DO-GR-200MR50
- Description
- GR200-MR50
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 319.9
- Max speed (rpm)
- 98
- Output torque (Nm)
- 560
- Peak torque (Nm)
- 740
- Ratio
- 6.2
Show all 16 sizesShow fewer sizes
- Indus part no.IH-DO-GR-200MR80
- Description
- GR200-MR80
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 497.9
- Max speed (rpm)
- 58
- Output torque (Nm)
- 950
- Peak torque (Nm)
- 1,250
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR100
- Description
- GR200-MR100
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 618.8
- Max speed (rpm)
- 46
- Output torque (Nm)
- 1,180
- Peak torque (Nm)
- 1,560
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR125
- Description
- GR200-MR125
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 779.3
- Max speed (rpm)
- 38
- Output torque (Nm)
- 1,450
- Peak torque (Nm)
- 1,920
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR160
- Description
- GR200-MR160
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 989.5
- Max speed (rpm)
- 29
- Output torque (Nm)
- 1,600
- Peak torque (Nm)
- 2,450
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR200
- Description
- GR200-MR200
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 1238.8
- Max speed (rpm)
- 23
- Output torque (Nm)
- 1,600
- Peak torque (Nm)
- 2,500
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR250
- Description
- GR200-MR250
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 1545.7
- Max speed (rpm)
- 18
- Output torque (Nm)
- 1,600
- Peak torque (Nm)
- 2,500
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR315
- Description
- GR200-MR315
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 1957.3
- Max speed (rpm)
- 15
- Output torque (Nm)
- 1,600
- Peak torque (Nm)
- 2,500
- Ratio
- 6.2
- Indus part no.IH-DO-GR-200MR375
- Description
- GR200-MR375
- Max flow (L/min)
- 30
- Displacement (cm³/rev)
- 2310.1
- Max speed (rpm)
- 12
- Output torque (Nm)
- 1,600
- Peak torque (Nm)
- 2,500
- Ratio
- 6.2
Description — What this part number is, as the manufacturer lists it. Max flow — Maximum flow capacity in litres per minute, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Displacement — Displacement per revolution, as published. Max speed — Maximum shaft speed, as published. Output torque — Rated output torque, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. The page states which rating it is. Peak torque — Maximum (peak) output torque, as the manufacturer publishes it. A circuit is limited by its lowest-rated component. Ratio — Reduction ratio, or the range of ratios the model is built in, as published.
Pressure, flow, speed, torque and load figures are the manufacturer’s published ratings for that part number. A circuit is limited by its lowest-rated component, so check them against the hose, fittings and valves it connects to.
What is the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor used for?▾
What does a code like GR80-MR100 mean?▾
Which sizes and motor variants do the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor cover?▾
Which torque do I select the GR wheel drive on?▾
What torque and speed do the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor deliver?▾
What oil does the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor need?▾
Which standards and approvals apply to the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor?▾
Can a vehicle fitted with the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor be towed?▾
How do I run the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor in Gulf heat?▾
How do the GR wheel drives compare with the EH and EW range?▾
Are the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor genuine Dinamic Oil units and can you export them?▾
Do you keep the Dinamic Oil GR Wheel Drives with Integrated Orbital Motor in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog

