DIN 766 Calibrated Chain — Galvanized
DIN 766 Calibrated Chain, in 9 sizes, 5 mm to 13 mm. Not for overhead lifting. Not rated for lifting. Indus part numbers.
Key features
- Product type: DIN 766 Calibrated Chain
- Pattern / standard: DIN 766
- Size range: 5 mm to 13 mm
- Size range
- 5 mm to 13 mm
- Material
- Mild steel
- Finish
- Zinc plated / electrophoretic coating
Product description
DIN 766 Calibrated Chain for tension, lashing and fixing duty. Built to the DIN 766 pattern. Mild steel, zinc plated / electrophoretic coating.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes
9 sizes, 5 mm to 13 mm. Every size has its own Indus part number in the table below.
Manufacturer's data
- Welded + deburring.
Choosing a size
For lifting use Grade 80 or Grade 100 alloy chain.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | DIN 766 Calibrated Chain |
| Pattern / standard | DIN 766 |
| Sizes | 9 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 5 mm to 13 mm |
Construction
| Parameter | Value |
|---|---|
| Material | Mild steel |
| Finish | Zinc plated / electrophoretic coating |
Shipping & lead time
Sizes & part numbers
9 sizes| Indus part no. | Size | Inside length (mm) | Inside width (mm) | Outside width (mm) | Weight (kg/m) |
|---|---|---|---|---|---|
| IH-LR-CH-D766CCG-5MM | 5 mm | 18.5 | 6 | 17 | 0.5 |
| IH-LR-CH-D766CCG-6MM | 6 mm | 18.5 | 7.2 | 20.2 | 0.8 |
| IH-LR-CH-D766CCG-7MM | 7 mm | 22 | 8.4 | 23.8 | 1.1 |
| IH-LR-CH-D766CCG-8MM | 8 mm | 24 | 9.6 | 27.2 | 1.4 |
| IH-LR-CH-D766CCG-9MM | 9 mm | 27 | 10.8 | 30.6 | 1.8 |
| IH-LR-CH-D766CCG-10MM | 10 mm | 28 | 12 | 34 | 2.2 |
| IH-LR-CH-D766CCG-11MM | 11 mm | 31 | 13.2 | 37.4 | 2.7 |
| IH-LR-CH-D766CCG-12MM | 12 mm | 36 | 14.4 | 40.8 | 3.1 |
| IH-LR-CH-D766CCG-13MM | 13 mm | 36 | 15.6 | 44.2 | 3.8 |
Size — Nominal size as the manufacturer states it. Inside length — Inside length of the link or bow. Inside width — Inside width of the link or jaw. Outside width — Outside width of the link. Weight — Weight per metre, as published. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the DIN 766 calibrated chain come in?▾
Can it be used for lifting?▾
Is DIN link chain lifting chain?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
