DIN 5683 Long Link Chain
DIN 5683 Long Link Chain, in 10 sizes. Not for overhead lifting. Not rated for lifting. Indus part numbers.
Key features
- Product type: DIN 5683 Long Link Chain
- Pattern / standard: DIN 5683
- Material
- Alloy steel 20MnSi
- Finish
- Zinc plated/selfcolor/hot dipped galvanized
Product description
DIN 5683 Long Link Chain for tension, lashing and fixing duty. Built to the DIN 5683 pattern. Alloy steel 20MnSi, zinc plated/selfcolor/hot dipped galvanized.
Not for overhead lifting. The manufacturer rates this range for tension, lashing or fixing, not for lifting. For a lift, use a rated lifting component — ask us which.
Sizes and ratings
10 sizes. Minimum breaking load 160 to 950 kN. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Welded.
Choosing a size
Select on link size and breaking load for the duty. For lifting use Grade 80 or Grade 100 alloy chain.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | DIN 5683 Long Link Chain |
| Pattern / standard | DIN 5683 |
| Sizes | 10 |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 160 to 950 kN |
Construction
| Parameter | Value |
|---|---|
| Material | Alloy steel 20MnSi |
| Finish | Zinc plated/selfcolor/hot dipped galvanized |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Size | Proof load (kN) | Min breaking load (kN) | Pitch (mm) | C (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| IH-LR-CH-D5683LLC-13MM | 13 mm (4/8) | 110 | 210 | 36 | 18 | 3.9 |
| IH-LR-CH-D5683LLC-16MM | 16 mm (5/8) | 32 | 160 | 144 | 56 | 4.4 |
| IH-LR-CH-D5683LLC-18MM | 18 mm (1″1/16) | 40 | 200 | 162 | 63 | 5.6 |
| IH-LR-CH-D5683LLC-20MM | 20 mm (1″3/16) | 50 | 250 | 180 | 70 | 6.9 |
| IH-LR-CH-D5683LLC-23MM | 23 mm (1″5/16) | 63 | 320 | 207 | 81 | 9.1 |
| IH-LR-CH-D5683LLC-26MM | 26 mm (1″) | 80 | 400 | 234 | 91 | 12 |
| IH-LR-CH-D5683LLC-30MM | 30 mm (1″3/16) | 110 | 560 | 270 | 105 | 15 |
| IH-LR-CH-D5683LLC-33MM | 33 mm (1″5/16) | 130 | 670 | 297 | 116 | 19 |
| IH-LR-CH-D5683LLC-36MM | 36 mm (1″7/16) | 160 | 800 | 324 | 126 | 22 |
| IH-LR-CH-D5683LLC-39MM | 39 mm (1″9/16) | 190 | 950 | 351 | 137 | 26 |
Size — Nominal size as the manufacturer states it. Proof load — Proof or test load the manufacturer applies to the part. A test figure — never a working limit. Min breaking load — Minimum breaking load. A test figure — never lift to it. Pitch — Thread pitch or link pitch, as the source heads it. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the DIN 5683 long link chain come in?▾
Can it be used for lifting?▾
Is DIN link chain lifting chain?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
