Copper-Alloy U-Bend Tubes — ASTM B395

U-tubes in copper, admiralty and aluminium brass and copper-nickel to ASTM B395, for coolers and condensers with removable bundles. Made to ASTM B395/B395M, ASTM B111, ASTM B135. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Copper-Alloy U-Bend Tubes
- Construction: Bent from straight seamless or welded tube
- Standards: ASTM B395/B395M, ASTM B111, ASTM B135, ASTM B68, BS 2871, BS EN12451, EN 12735-2, JIS H3300
- Base tube material: C12200 etc.; C44300–C44500; C68700; C70600/C70620; C71500/C71520; C72200
- Wall thickness: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Product type
- Copper-Alloy U-Bend Tubes
- Construction
- Bent from straight seamless or welded tube
- Base tube material
- C12200 etc.; C44300–C44500; C68700; C70600/C70620; C71500/C71520; C72200
Product description
U-tubes in copper, admiralty and aluminium brass and copper-nickel to ASTM B395, for coolers and condensers with removable bundles. Bends are relief-annealed where the alloy needs it, and a dual-gauge tube with a heavier bend section is available.
Specification
- Minimum bend radius: 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD
- Wall thinning at the bend: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Bend heat treatment: To order: stress-relief or solution anneal of the bend plus ~150 mm of leg (A688), or ≥300 mm where the project specification requires
- Leg length: Up to ~12 m typical; straight tube up to 30 m on request
- Size scope: OD ≤2 in (50 mm)
- Leg spacing tolerance: (2R − OD) ±1.6 mm (1/16 in)
- Leg length tolerance (all plus): ≤6 m +3.2; 6–9 m +4.0; 9–18 m +6.4; >18 m +9.5 mm; leg difference ≤3.2 mm
- Dual-gauge option: bend section one BWG heavier, constant ID; heavy section ≥100 mm long
Standards
ASTM B395/B395M, ASTM B111, ASTM B135, ASTM B68, BS 2871, BS EN12451, EN 12735-2, JIS H3300. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: C12200 etc.; C44300–C44500; C68700; C70600/C70620; C71500/C71520; C72200
Testing and documents
- Eddy current before bending
- Hydrostatic at 48 MPa fibre stress (≤6.9 MPa) or pneumatic 400 kPa for 5 s, on each U-tube
- Mercurous nitrate / ammonia vapour on bend and leg for brasses
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- U-tube feedwater heaters, coolers and chillers
Standard geometry
| Alloy / temper | Wall (mm) | Wall (in) | Min centreline bend radius |
|---|---|---|---|
| C71500 / C71520 HR50 | 1.24 | 0.049 | 2.2 × OD |
| C71500 / C71520 HR50 | 1.47 | 0.058 | 2.0 × OD |
These are the limits of the standard, not part numbers. Each item is made to your drawing.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Copper-Alloy U-Bend Tubes |
| Construction | Bent from straight seamless or welded tube |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM B395/B395M, ASTM B111, ASTM B135, ASTM B68, BS 2871, BS EN12451, EN 12735-2, JIS H3300 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | C12200 etc.; C44300–C44500; C68700; C70600/C70620; C71500/C71520; C72200 |
Dimensions
| Parameter | Value |
|---|---|
| Wall thickness | Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage |
| Length | Random or fixed lengths; cut to length on request |
| Bend radius | 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD |
| Size table | Made to your drawing; standard geometry in the description |
Quality
| Parameter | Value |
|---|---|
| Testing | Eddy current before bending; Hydrostatic at 48 MPa fibre stress (≤6.9 MPa) or pneumatic 400 kPa for 5 s, on each U-tube; Mercurous nitrate / ammonia vapour on bend and leg for brasses |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | U-tube feedwater heaters, coolers and chillers |
Shipping & lead time
What are Copper-Alloy U-Bend Tubes, ASTM B395 used for?▾
What sizes can Copper-Alloy U-Bend Tubes, ASTM B395 be supplied in?▾
What do I need to send to order Copper-Alloy U-Bend Tubes, ASTM B395 to the right size and grade?▾
How tight can the bends be on Copper-Alloy U-Bend Tubes, ASTM B395?▾
What tests and certificates come with Copper-Alloy U-Bend Tubes, ASTM B395?▾
Which materials and grades are Copper-Alloy U-Bend Tubes, ASTM B395 available in?▾
Which standards apply to Copper-Alloy U-Bend Tubes, ASTM B395?▾
What do Copper-Alloy U-Bend Tubes, ASTM B395 connect to or fit with?▾
How should Copper-Alloy U-Bend Tubes, ASTM B395 be inspected on receipt and stored?▾
Where are Copper-Alloy U-Bend Tubes, ASTM B395 used?▾
Can Copper-Alloy U-Bend Tubes, ASTM B395 be supplied to customers outside the UAE?▾
Do you hold Copper-Alloy U-Bend Tubes, ASTM B395 in stock, or are they made to order?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Heat-transfer tubes
U-bend tubes: bend radius, wall thinning and heat treatment
U-tubes are ordered as a bend schedule, not a size. What the minimum bend radius is, how wall thinning and ovality are controlled, when bends are heat treated and tested, and what to put on the order — for carbon, alloy, stainless, nickel-alloy and copper-alloy U-tubes.
4 min read
Heat-transfer tubes
Copper-nickel 90/10 vs 70/30 vs admiralty brass in seawater cooling
Condenser and cooler tube for seawater, brackish and cooling-tower water: how admiralty brass, aluminium brass and 90/10, 70/30 and 66-30-2-2 copper-nickel differ, the water velocities each tolerates, and how to order them to ASTM B111.
3 min read
