Brennan 7008 MJ-FJIS Straight Conversion Adapters
Category image · Hoses & FittingsBrennan 7008 MJ-FJIS Straight Conversion Adapters: 5 part numbers.
Product description
Brennan 7008 MJ-FJIS Straight Conversion Adapters: 5 part numbers.
Specification
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Brennan part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Brennan part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
5 sizes- Brennan part no.7008-F-32-32
- Description
- Straight Adapter, 2-1/2-12 X 2-11, JIC X Jis, SAE J514, Steel
- Working pressure (bar)
- —
- Brennan part no.7008-F-06-06-SS
- Description
- Straight Adapter, 9/16-18 X 3/8-19, JIC X Jis, SAE J514, SS
- Working pressure (bar)
- 345
- Brennan part no.7008-F-08-08
- Description
- Straight Adapter, 3/4-16 X 1/2-14, JIC X Jis, SAE J514, Steel
- Working pressure (bar)
- 345
- Brennan part no.7008-F-20-20
- Description
- Straight Adapter, 1-5/8-12 X 1-1/4-11, JIC X Jis, SAE J514, Steel
- Working pressure (bar)
- —
- Brennan part no.7008-F-12-12
- Description
- Straight Adapter, 1-1/16-12 X 3/4-14, JIC X Jis, SAE J514, Steel
- Working pressure (bar)
- 276
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What are the Brennan 7008 MJ-FJIS Straight Conversion Adapters used for?▾
What do the letters MJ-FJIS mean in the Brennan 7008 part number?▾
How does the Brennan 7008 MJ-FJIS Straight Conversion Adapters differ from the Brennan 7008 MJ-MJIS Straight Conversion Adapters?▾
What sizes does the Brennan 7008 MJ-FJIS Straight Conversion Adapters come in?▾
How do I choose the right size of the Brennan 7008 MJ-FJIS Straight Conversion Adapters?▾
What pressure are the Brennan 7008 MJ-FJIS Straight Conversion Adapters rated for?▾
What is the Brennan 7008 MJ-FJIS Straight Conversion Adapters made from, and is stainless available?▾
Which standards does the Brennan 7008 MJ-FJIS Straight Conversion Adapters follow?▾
What do the Brennan 7008 MJ-FJIS Straight Conversion Adapters connect to?▾
How should I fit and seal the Brennan 7008 MJ-FJIS Straight Conversion Adapters?▾
Where is the Brennan 7008 MJ-FJIS Straight Conversion Adapters made, and can you export it from Dubai?▾
Are the Brennan 7008 MJ-FJIS Straight Conversion Adapters available from stock in the UAE?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Thread & fitting identification
Thread size and pitch, by family: the reference table for the bench
JIC 9/16"-18 and ORFS 9/16"-18 are the same thread. They will assemble, and one of them will leak. Every designation and pitch we stock, grouped by family, with the collisions marked.
6 min read
Buying fittings & adapters
JIC 37° adapters: the shapes, sizes, ratings and how to order the right one
A JIC adapter is defined by three things: its shape, its two ends and its dash size. Get all three in the order and the right part arrives; miss one and you get a JIC × NPT elbow when the port was ORB. The steel 37° range — straights, elbows, tees, crosses, bulkheads, swivels, adjustable port ends, caps and plugs — with Parker’s published ratings by dash size, torque and flats, and a checklist for ordering.
8 min read
Thread & fitting identification
Fittings on American machines: the inch families, and what travels with them
JIC, ORFS, NPT, O-ring boss and split flanges arrive as a set. What each is for, which two are routinely confused, and the mistake that ruins a port rather than a fitting.
3 min read






