Brass Push-Lock Hose Barb × Inverted Flare Male Swivel

The Brass Push-Lock Hose Barb × Inverted Flare Male Swivel is a straight hose barb, in CA360 brass (C36000 free-machining brass). Its ends are push-lock hose barb and inverted flare male swivel. Push-lock barbs take push-on hose without clamps or ferrules; the manufacturer recommends them for low-pressure lines, with push-lock hose rated for the medium.

Construction

• Body: straight hose barb
• End 1: push-lock hose barb
• End 2: inverted flare male swivel
• Material: CA360 brass (C36000 free-machining brass)

Ends and sealing

• push-lock hose barb: push-lock barb: the hose is pushed over the barbs and held without a clamp or ferrule.
• inverted flare: inverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shielded; SAE J512.

Sizes

9 part numbers, 1/4" to 5/8" hose. The Sizes & Part Numbers tab lists the size on each end for every one.

• End 1: push-lock hose barb, 1/4" to 5/8"
• End 2: inverted flare, 3/16" to 5/8"

Pressure and service

The manufacturer publishes no pressure rating for this family. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.

How to order

Quote the Indus part number from the size table. If you only have the fitting, send the size and thread type on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.